Overview
The Skyjacker DA45 is a 6 inch drop pitman arm for the 1987–1993 Dodge W250 and W350 with power steering.
The arm is an extreme drop design with a 6 inch drop in the front position, and it is designed to reduce bump steer. It carries a limited lifetime warranty.
Only two models are covered, both Base trims of the Dodge three-quarter-ton and one-ton four-wheel-drive trucks, across seven model years.
The shorter list compared with Skyjacker’s DA20 is useful to know. The DA20 covers the W100, W150, W200, W250, W300 and W350 in wider year ranges, while the DA45 targets only the 1987–1993 W250 and W350, so owners of those two trucks have a model-specific part number to look for.
The drop itself does the work: a 6 inch drop in the front position lowers the arm end that connects to the drag link, which helps a lifted four-wheel-drive truck bring its linkage closer to a better angle. It is made for power steering only, so confirm the steering box before ordering.
Key features
- 6 inch amount of drop
- Front position
- For power steering
- Direct fit
- It carries a limited lifetime warranty.
- It is designed to reduce bump steer.
- Covers the W250 and W350
Steering setup after a lift
Lifting a four-wheel-drive truck changes the angle of the steering linkage, which can show up as wander, bump steer or a steering wheel that feels off center. A drop pitman arm is one way to bring the drag link closer to level. Because the arm moves the link end of the steering, its effect is felt directly at the front wheels.
Look over the drag link, tie rod ends and steering box mounts before installing a new arm, since worn joints can hide the benefit. After the work, check that the steering turns freely to both sides and that the front tires wear evenly at the next alignment check.
- Confirm steering box type first
- Inspect drag link and tie rod ends
- Recheck fasteners after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | DA45 |
| UPC | 803696127231 |
| Product type | Extreme Drop Pitman Arm |
| Amount of drop | 6 inches |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Power steering |
| Warranty | Limited lifetime warranty |
Vehicle fitment
The arm fits two Dodge models over the same seven years. Both are Base trim.
- 1987–1993 Dodge W250 (Base)
- 1987–1993 Dodge W350 (Base)
The W100, W150, W200 and W300 and the Ram pickups are not covered. Confirm fit against your truck’s year, model and trim before buying.
Installation notes
The arm is a direct fit for front power steering. Use correct torque values for the steering components, and have a qualified technician check the lifted truck’s steering after installation.
What’s included
One pitman arm. Nuts, washers and other hardware may be needed, so check the package contents against your installation before starting.









