Overview
The Pro Comp DC601 is a 4 inch drop pitman arm for power steering. It fits the 2009-2010 Dodge Ram 2500 and 3500 and the 2011-2014 Ram 2500 and 3500, and it mounts at the front.
Raising a truck steepens the drag link angle. Moving the link attachment down with a drop arm reduces that angle, which is the purpose of this steering correction for a lifted truck.
The truck’s name changed from Dodge Ram to Ram in 2011, which is why the list shows both.
Ram trucks of this generation share an arm across the two name changes, which is why the list has two makes.
The 2009 to 2014 trucks form one generation, which explains why a single arm covers the Dodge and Ram names.
The truck’s drag link angle changes after lifting, and the DC601’s 4 inch drop is intended to restore it.
Key features
- 4 inch drop pitman arm
- Steering correction on lifted trucks
- Power steering
- Front position
- Covers 2009 to 2014 Ram 2500 and 3500
Steering geometry after a lift
A raised truck changes the angle of the drag link, and that change can make steering feel loose or cause the front wheels to wander. A drop pitman arm moves the link attachment down to bring that angle back toward stock. It works best as part of a complete steering check rather than on its own, especially when other lift parts have changed the suspension.
Before fitting one, look at the tie rod ends, the drag link ends and the steering stabilizer for play. Worn joints can hide the benefit of a new arm and make the truck feel unsettled on rough roads. Power steering fluid level and hose condition are worth a glance too. After installation, have the front end aligned and check that the steering turns freely from lock to lock without binding.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | DC601 |
| UPC | 614901149982 |
| Product type | Drop pitman arm |
| Amount of drop | 4 inches |
| Position | Front |
| Steering type | Power steering |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Pro Comp Suspension DC601 includes: 2009–2010 Dodge Ram 2500 (Laramie, Power Wagon, SLT, ST, SXT, TRX); 2009–2010 Dodge Ram 3500 (Laramie, SLT, ST, SXT); 2011–2014 Ram 2500 (Laramie, Laramie Limited, Laramie Longhorn); 2011–2014 Ram 3500 (Laramie, Laramie Limited, Laramie Longhorn).
It fits 2009-2014 Ram 2500 and 3500 trucks. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Release the drag link from the old arm, then pull the arm with a puller. Install the DC601 with the steering box centered, tighten the nut and verify clearance through full steering lock.
What’s included
- One pitman arm, part number DC601







