Overview
The RE2500 is a 4 inch drop pitman arm for power steering boxes. It is made to fit the 1987-1995 Jeep Wrangler YJ, the 1997-2006 Wrangler TJ, the 2004-2006 Wrangler LJ and the 1984-2001 Cherokee XJ.
A drop pitman arm reduces steering linkage angles on lifted vehicles. It is intended for Jeeps running more than 3.5 inch of lift.
Key features
- 4 inch drop
- Made for power steering boxes
- Reduces steering linkage angles on lifted vehicles
- Recommended for Jeeps with more than 3.5 inch of lift
Steering geometry after a lift
Lifting a Jeep changes the angles of the steering linkage, and a drop pitman arm is one way to bring those angles back toward a workable range. The arm moves the drag link lower so the steering works through a smaller angle at the joints. Because the steering box is involved, the arm should be matched to the power steering setup and not used on a manual box.
After fitting a drop arm, check the drag link, tie rod ends and steering stop for clearance and play. Turn the wheel from lock to lock and watch for binding or contact with the frame or tires. Have the alignment set once the steering work is complete, since toe and caster settings depend on the final linkage.
- Check drag link and tie rod ends
- Test lock to lock for binding
- Set alignment after steering work
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE2500 |
| UPC | 614901440201 |
| Drop | 4 inch |
| Steering type | Power steering |
| Type | Drop pitman arm |
| Sold as | Individually |
Vehicle fitment
It fits the YJ, TJ, LJ and XJ Jeeps with power steering.
Manual steering boxes are not covered; the product is for power steering boxes only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A drop pitman arm changes the steering linkage geometry, so have the alignment checked after installation.
What’s included
One pitman arm, sold individually.














