Overview
The Fabtech FTS3409 is a 3 inch dropped pitman arm for the 1994–1999 Dodge Ram 1500 with power steering.
Dropped pitman arms are needed in many suspension kits, since a lift changes the steering geometry and the drag link needs a corrected arm. The arms are forged and CNC machined, which is designed to make them stronger than stock. This part is for the Ram 1500, with the 3 inch drop in the front position.
Owners of lifted first-generation Ram half-ton trucks will find the FTS3409 relevant when the factory arm leaves the steering linkage at a poor angle.
Because a lift alters the geometry between the steering box and the axle, the drag link on a raised Ram can end up working at a steep angle. A 3 inch drop arm such as the FTS3409 lowers the arm end so the linkage sits closer to level, which is the reason Fabtech includes dropped arms in many of its kits.
Key features
- 3 inch amount of drop
- Front position
- For power steering
- Direct fit for the 1994–1999 Dodge Ram 1500
- Forged and CNC machined
- Designed to be stronger than a stock unit
- Meant to correct steering geometry after a suspension system is installed
Steering on a lifted Ram
On a lifted first-generation Ram, the steering box sits in a different relation to the axle than it did stock. The drag link can end up steep, which pulls the steering off center and transmits bumps into the wheel. A dropped arm lowers the link end so the linkage works closer to level, reducing that effect without changing the rest of the steering.
The arm is only one part of the system. The drag link, tie rod ends and steering box all share the load, so worn parts can hide or mimic arm problems. Inspect them together, and do not ignore play at the arm, since it can change how the steering feels on the road.
- Check the drag link and tie rod ends for play
- Look for a loose or bent pitman arm
- Inspect the steering box for leaks
- Have the alignment checked after installation
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS3409 |
| UPC | 674866003897 |
| Product type | Pitman arm |
| Amount of drop | 3 inches |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Power steering |
Vehicle fitment
It fits a single truck line over six model years, with the trims shown below.
- 1994–1999 Dodge Ram 1500 (Base, LT, Laramie, ST, Sport)
This part is for the 1994–1999 Dodge Ram 1500 only, so confirm your vehicle’s year, model and trim before ordering.
Installation notes
It replaces the factory arm as a direct fit. Follow the included instructions for torque and tools. A qualified technician should check the steering once the lifted truck is back on the ground.
What’s included
One pitman arm. Confirm the hardware needed for your installation before starting.







