Overview
The Fabtech Performance Twin Tube Shock Absorber, part number FTS7160, is a hydraulic twin-tube shock without a reservoir. Its collapsed length is 22.8 inches, its extended length is 13.64 inches and its travel is 9.16 inches.
Fabtech built this 2 inch twin-tube body with a 1 3/8 inch OD piston and a 9/16 inch chrome hardened rod. Inside, a closed cell foam insert and high flow 9 stage valving are meant to control dampening and limit fade at speed.
Key features
- 9.16 inch travel length
- High flow 9 stage valving
- Closed cell foam insert
- Chrome hardened 9/16 inch piston rod with a 1 3/8 inch OD piston
Length and mount matching
Shock length is the first measurement to check, because a shock that is too long or too short cannot reach both mounts at full travel. Collapsed and extended lengths define the working range, and the travel figure tells you how much of that range the suspension will use. Measure with the suspension at ride height and again at full droop and full compression, since the mounts move through a wide arc.
Mount codes are a separate check from length. Matching eye style and bushing size keeps the shock from binding, and worn bushings in the old mounts can hide a fit problem until the new shock is in. Check that the body diameter and rod size clear the spring and mounting brackets at both ends of travel.
- Measure the old shock’s collapsed and extended length
- Compare mount codes before ordering
- Inspect the rod for bends or pitting before installing
- Check spring clearance at full compression
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7160 |
| UPC | 674866000056 |
| Shock body | 2 inch diameter twin tube hydraulic |
| Collapsed length | 22.8 in |
| Extended length | 13.64 in |
| Travel length | 9.16 in |
| Lower mount | S1 |
| Upper mount | EB1 |
| Reservoir | No |
| Finish | White powdercoat with blue Fabtech logo |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
Vehicle fitment
Check your vehicle’s year, model and trim before buying, then measure the mount codes and lengths against your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lower mount S1 and upper mount EB1 are the mount codes given, so match them to the existing mounts before installation. Check that the collapsed and extended lengths clear your suspension at both ends of travel.
What’s included
This item is the shock unit itself.
Not included: Have mounting hardware on hand that matches your installation before starting.



















