Overview
The Fabtech FTS801402 is a front Dirt Logic 2.25 Resi shock for the 2018 Jeep Wrangler (JL) Unlimited, matched to a 3 inch lift. It fits the Unlimited trims covered in the fitment section.
The shock has a billet aluminum top cap and rod end, and urethane bushings that reduce noise and rattle. It is tuned and custom fit per application, and it is offered under part numbers K4102DL, K4108DL and K4118DL.
Key features
- Front position for 3 inch lift applications
- Stainless steel construction
- Billet aluminum top cap and rod end
- Urethane bushings reduce noise and rattle
- Tuned and custom fit per application
Things to check before installing
Front shocks on a lifted Wrangler carry a large share of the steering and damping load, so their condition matters for control on rough trails and at highway speeds. Look for oil on the body, a clunking or knocking feel at the front, and uneven tire wear. Worn bushings can also transfer noise into the cabin, so inspect the rubber parts before reusing them.
Front shocks are often replaced along with the steering stabilizer, tie rod ends and control arm bushings when a lift is installed. Confirm the steering components are in good shape, since a new shock will not correct a worn joint. After installation, a front end alignment helps keep tire wear even and the steering predictable.
- Replace front shocks in pairs for matched damping
- Inspect tie rod ends and control arm bushings
- Check for leaks and loose top mounts after the first drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS801402 |
| UPC | 674866106369 |
| Position | Front |
| Lift height | 3 in |
| Material | Stainless steel |
| Top cap and rod end | Billet aluminum |
| Bushings | Urethane |
| Application | PN K4102DL, K4108DL, K4118DL |
Vehicle fitment
It fits the 2018 Jeep Wrangler (JL) Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S.
Two-door Wrangler JL models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is matched to a 3 inch lift, so confirm your truck’s lift height matches before installation and check the part numbers against your setup.
What’s included
The package contains one front shock. Check the package contents against your installation before starting.








