Overview
The Fabtech Dirt Logic 2.25 shock absorber, part number FTS810312, is a rear gas charged monotube shock for the 2000–2006 Toyota Tundra with a 2.5 in. lift.
The Dirt Logic 2.25 monotube gas charged shock is built for large diameter damping on lifted vehicles. It mounts in the OE mounting position as well as in multiple shock configurations. The Dirt Logic 2.25 line comes with or without a reservoir, and this part is stainless steel.
Key features
- Dirt Logic 2.25 monotube shock
- Gas charged
- Stainless steel
- Rear position
- For a 2.5 in. lift
- Mounts in the OE mounting as well as multiple shock configurations
- Direct fit
Choosing a large diameter shock
Large diameter monotube shocks use a bigger piston and body than a standard shock, which gives more damping capacity for heavier wheel and tire loads. On a lifted truck, that extra capacity helps control the axle when the suspension is working harder. Gas charge keeps the oil under pressure, which helps reduce foaming during repeated hard use.
Reservoir and non-reservoir designs differ mainly in space and heat handling. A reservoir gives the shock more room for oil and gas, which can suit off-road use with frequent hard driving. Choose the setup that fits the space around the axle, since a reservoir needs a clear mounting point.
Replace shocks in pairs so both sides damp the same way, and look at the upper and lower mounts, bushings and bump stops at the same time. Stainless steel bodies resist corrosion well but still need rinsing after salty or muddy trips. Leaking oil, a knock over bumps, or uneven tire wear show a shock is worn.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS810312 (also shown as FABFTS810312) |
| UPC | 674866094963 |
| Product type | Shock absorber |
| Series | Dirt Logic 2.25 |
| Position | Rear |
| Lift height | 2.5 in. lift |
| Type | Monotube, gas charged |
| Material | Stainless steel |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Fabtech FTS810312 covers the 2000–2006 Toyota Tundra (Base, Limited, SR5).
Fit covers the 2000–2006 Toyota Tundra in Base, Limited and SR5 trims. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension components affect handling and braking, so professional installation is recommended. Follow the torque specifications for your application.
- Have the alignment checked after any suspension work.
- Check tire clearance and brake hose and wiring length through the full range of travel.
- Re-check fasteners after the first miles of driving.
- Check your local regulations on suspension height changes.
- Replace shocks in pairs so the left and right sides match.
- Confirm the shock mounts and lift height suit your Tundra before installation, and check tire and brake line clearance at full travel.
What’s included
One shock absorber.
Not included: No hardware or reservoir is included. Plan to source any mounting hardware before installation.








