Overview
The Fabtech FTS7348 is a rear shock absorber for 2014–2016 Ram 2500 and 2013–2016 Ram 3500 4WD trucks with a 7 inch lift. It is a direct-fit shock from the Performance series twin tube range.
At the back axle, a 7 inch lift shifts the shock geometry, so this unit is sized for that height. It suits Ram heavy-duty owners who run a 7 inch lift and need a rear shock for the model years in Fabtech’s list.
Key features
- Performance series twin tube shock absorber design
- Direct-fit application for 4WD Ram 2500 and 3500 trucks
- Sized for a 7 inch lift
- Fabtech part number FTS7348 with UPC 674866089471
Rear shock care and lift geometry
At the back axle, the rear shock controls rebound and compression, and a lift changes how it sits and how far it moves. A rear shock sized for the lift gives more consistent control over bumps and when the truck is loaded. Rear damping that is too soft can let the axle hop, while damping that is too firm can make the ride feel harsh.
Rear shocks should be inspected regularly, especially on trucks used for trailers or rough roads. Check for oil residue on the body, play in the bushings and any damage to the shaft from debris. Replacing the pair together keeps the rear end balanced and avoids uneven response from one side.
- Check both eyes for play at each service
- Clean mud off the shaft to protect the seal
- Confirm the mounting position before fitting
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7348 |
| UPC | 674866089471 |
| Position | Rear; confirm against the shock being replaced before ordering |
| Fit type | Direct fit |
| Lift height | 7 inch |
| Shock type | Performance series twin tube |
Vehicle fitment
Fit covers the 2014–2016 Ram 2500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Lone Star, Outdoorsman, SLT, Tradesman) and 2013–2016 Ram 3500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST, Tradesman).
The Power Wagon trim is not in the 2500 list for this part number, and other Ram years are outside it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fabtech’s copy gives the position as Rear in the short description but Front in the specification field. Compare the position with the shock you are replacing before fitting, because the front and rear units are different parts.
What’s included
Confirm whether mounting hardware or brackets come with the shock before starting, and check the package contents.








