Overview
The Fabtech FTS7330 is a Performance Twin Tube shock absorber with a 2.38 inch hydraulic body, a 9/16 inch chrome hardened piston rod and high flow 9-stage valving. It uses EB1 mounts at both ends and has no reservoir.
The extended length is 25.95 inches, collapsed length is 15.42 inches and travel length is 10.53 inches. The closed cell foam insert is meant to limit shock fade at high speeds, and the shock is designed to work with Fabtech suspension systems.
Key features
- EB1 lower and upper mounts
- High flow 9-stage valving for controlled damping
- Closed cell foam insert meant to limit shock fade
- Twin tube hydraulic body, 2.38 inch diameter
- 9/16 inch chrome hardened piston rod
- White powdercoat finish with a blue Fabtech logo
Extended length and lift height
The extended length of a shock sets how far it can reach when the suspension droops. On a vehicle with added height or larger tires, the shock may need to reach farther, so the extended length must cover the new droop range. Measuring the installed length with the suspension unloaded and fully drooped gives a clear picture of whether a shock will fit.
Longer shocks also change the leverage of the damper and the way the spring and bump stop work together. After a lift or tire change, a new shock often works best with updated bump stops and a check of brake line and driveshaft clearance. Shocks with EB1 mounts at both ends are simple to inspect, since the same bushing style is used throughout.
- Measure installed length at full droop
- Check brake lines and driveshaft clearance
- Inspect bump stops after a height change
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7330 |
| UPC | 674866015722 |
| Type | Performance Twin Tube shock absorber, hydraulic |
| Body diameter | 2.38 inch twin tube |
| Extended length | 25.95 in |
| Collapsed length | 15.42 in |
| Travel length | 10.53 in |
| Lower mount | EB1 |
| Upper mount | EB1 |
| Reservoir | No |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
Vehicle fitment
Work out the year, model and trim for your truck before buying. Compare the EB1 mounts and the 25.95 inch extended length with the shock you are replacing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One Fabtech Performance Twin Tube shock absorber, part FTS7330. Look over the bushings and hardware before starting the install.








