Overview
The Fabtech FTS8065 is a dual steering stabilizer kit for 2020–2026 Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD trucks, and for the 2020–2021 Silverado 3500 HD and Sierra 3500 HD.
On late-model GM heavy-duty trucks, the stock steering system has a robust center link, but oversized tires can still send steering wheel feedback through it. The dual stabilizer design damps steering loads from both 35-inch and 37-inch tires.
The kit uses heavy-duty brackets that mount to the inside of the frame and to the GM center link. The two frame brackets sit parallel to each other, which Fabtech says gives maximum damping both on and off road.
Key features
- Dual steering stabilizers damp steering loads from large tires
- Heavy-duty brackets mount inside the frame and to the GM center link
- Frame brackets are positioned parallel to each other
- Designed to reduce steering wheel feedback from oversized tires
- Direct fit kit
Choosing a steering stabilizer setup
A steering stabilizer works as a damper between the axle or frame and the steering linkage. It slows the quick back-and-forth movement that large, heavy tires can send into the steering wheel, so the driver feels less kickback over rough ground and at highway speed. It does not correct alignment or worn steering parts, so it works best when the rest of the linkage is sound.
Before adding a stabilizer, look over the tie rod ends, drag link, pitman arm and ball joints for play. Worn components can cause feedback that a stabilizer cannot fix. After a lift or a tire change, have the alignment checked, since toe settings affect how the wheels respond to bumps.
- Inspect brackets and fasteners after the first few trail runs
- Check that both stabilizers move freely through full steering lock
- Recheck toe after changing tire size
- Replace worn linkage bushings at the same time
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS8065 |
| Type | Dual steering stabilizer kit |
| Mounting points | Inside of the frame and the GM center link |
| Tire sizes addressed | 35-inch and 37-inch tires |
| Installation | Direct fit |
Vehicle fitment
It fits the 2020–2026 Chevrolet Silverado 2500 HD, the 2020–2021 Chevrolet Silverado 3500 HD, the 2020–2026 GMC Sierra 2500 HD and the 2020–2021 GMC Sierra 3500 HD.
The list does not include the 2019 and earlier Silverado and Sierra HD trucks, or any 1500 model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets mount to the frame and the center link, so plan on a full bracket install rather than a stabilizer-only swap. Confirm the two frame brackets sit parallel to each other before final tightening.
What’s included
The kit includes the dual stabilizers and the heavy-duty brackets that mount to the frame and the center link.








