Overview
The Crown Automotive CRO68066693AA is a steering stabilizer bracket for left-hand-drive 2007–2018 Jeep Wrangler (JK) vehicles. It mounts to the tie rod assembly.
The bracket holds the steering stabilizer to the steering linkage at the tie rod. It is the bracket only, and the stabilizer it pairs with is a separate part.
Key features
- Steering stabilizer bracket
- Mounts to the tie rod assembly
- Made for left-hand-drive vehicles
- It is a direct fit.
Inspecting the steering connection
The steering stabilizer works against sudden side-to-side movement of the front wheels, and the bracket is the point where it anchors to the linkage. A bracket that flexes or cracks can let the stabilizer move out of position, which makes steering feel loose or wandering on rough ground.
When the bracket is off, look at the tie rod end, the adjuster sleeve and the fasteners that hold the bracket. Movement at the tie rod ball joint, torn boots or rust around the threads are signs the steering connection needs attention before the new bracket goes on. Re-check torque once the parts are in place and the wheels are on the ground.
- Tie rod end play
- Torn boots or grease leaks
- Rust or bent bracket tabs
- Loose or stretched fasteners
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO68066693AA |
| Component | Steering stabilizer bracket |
| Mounts to | Tie rod assembly |
| Drive side | Left-hand drive |
| Installation | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), in both two-door and Unlimited four-door body styles.
The list does not include the 2018 and later Wrangler JL or the Gladiator JT. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket attaches at the tie rod assembly, so inspect the tie rod and its fasteners while the bracket is off. Check that the bracket matches your steering layout before fitting it.
What’s included
The package is the bracket itself. The stabilizer and any separate hardware are not part of this item.









