Select your vehicle

Fabtech 3″ Standard Coil Spring Kit – FTS24162

Fabtech

$392.02In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 7:10 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Single rate coil spring kit with a 3-inch lift
  • Increases travel and articulation over stock springs
  • Same load capacity as factory for 2-door or 4-door models
  • Fits 2007–2018 Jeep Wrangler JK Unlimited 4-door

Description

Overview

The Fabtech 3-inch Standard Coil Spring Kit (part number FTS24162) gives a 3-inch lift for the 2007–2018 Jeep Wrangler JK Unlimited 4-door. The springs increase suspension travel and articulation over factory springs.

This is a single rate spring, so it carries the same load as the factory spring on a 2-door or 4-door vehicle. The ride stays closer to the stock feel than a dual rate spring.

Key features

  • 3-inch lift from the standard coil spring design
  • Single rate design
  • Load carrying capacity matches the factory springs
  • More travel and articulation than stock
  • No spring retainers or limiting straps needed with Fabtech suspensions and shocks
  • Works with the Crawler Long Arm, Trail Short Arm and Sport systems

Travel and articulation

More suspension travel lets the wheels reach over obstacles and keep contact with the ground on uneven terrain. A single rate spring keeps the ride close to stock while adding height and travel. This suits a vehicle used for mixed road and trail driving, where a steadier ride matters on pavement.

A 3-inch change alters the front and rear geometry, so the driveline angles and brake lines should be checked after installation. Taller springs also change the position of the shocks, so check shock length and mounts before the first trail run. Tires that rub at full steering lock should be addressed before heavier use.

Coil springs can sag with age and heavy use. Look for uneven height side to side, cracks in the paint or powder coat and any sign of shifting in the seat. Clean the springs periodically to slow corrosion.

  • Check driveline angles and brake lines
  • Inspect shock length and mounts
  • Confirm tire clearance at full lock

Specifications

Brand Fabtech
Part number FTS24162
Lift 3 inches
Spring design Single rate
Compatible systems Crawler Long Arm, Trail Short Arm and Sport
Fitment type Direct fit

Vehicle fitment

It fits the 2007–2018 Jeep Wrangler (JK) Unlimited 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X 4-door models.

The 2-door JK and the JL and later Wranglers are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the springs are designed to work with Fabtech suspensions and shocks, the spring retainers and limiting straps used on other kits are not needed. Check the brake lines and the driveline angles after the lift.

What’s included

The coil springs in the kit. No other hardware is included, so check the package contents against your installation before starting.

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–2018Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the FTS24162 fit a Jeep Wrangler JK 2-door?

No. It fits the Unlimited 4-door models of the 2007–2018 Wrangler JK only. The 2-door JK is not a covered model, so confirm the body style for your vehicle before ordering.

Do I need spring retainers with this kit?

No. Fabtech says these springs do not need spring retainers or limiting straps to stay seated through their travel, when used with Fabtech suspensions and shocks.

Is the FTS24162 a dual rate spring?

No. It is a single rate design, with load carrying capacity matching the factory springs. A dual rate spring would have a soft first stage and a firmer second stage.

Do I need an alignment after a 3-inch spring change?

Yes, it is a good idea. Changing height affects caster and toe, so have the alignment checked after installation. Inspect the brake lines and driveline angles at the same visit, since height changes affect both.

Should I replace shocks when fitting these springs?

Check the shocks before installing. Shock length and mounts should suit the new height, and worn shocks reduce control on rough trails. Look for leaks, worn bushings and bottoming before the first trail run.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon