Overview
The Fabtech FTS98300-73 is a 3 inch lift spindle kit for the 2001–2008 Ford Ranger in Edge, Sport, Tremor, XL and XLT trims. The kit contains driver and passenger side lift spindles that raise the front end in place of the factory spindles.
The rear lift is provided by lift blocks and U-bolts, and the lift height range is 3 to 4.99 inches. Complete installation instructions come with the kit.
Key features
- Driver and passenger side lift spindles in one kit
- Lift height range of 3 to 4.99 inches
- Rear lift uses lift blocks and U-bolts
- Complete installation instructions included
Things to check on a Ranger
A lift spindle raises the front end, but the rear is handled differently on this kit. Lift blocks and U-bolts raise the axle, which changes pinion angle and driveline geometry. Once the work is done, the driveline joints can run at steeper angles, so vibration under acceleration is worth watching for on the first drives.
Before starting, inspect the factory ball joints, tie rod ends and brake hoses. Brake lines are often stretched by a lift and may need extra slack. Shock length should also be checked against the new ride height, since a longer setup loads the mounts differently. Steering components can be reviewed while the front end is apart.
- Inspect the brake hoses for stretch after the front is raised
- Check U-bolt nuts after the first few drives
- Look for driveline vibration under acceleration
- Confirm shock length suits the new ride height
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS98300-73 |
| UPC | 674866035553 |
| Lift height | 3 inch |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Knuckle |
| Rear lift method | Lift blocks and U-bolts |
| Shocks | Shocks are included. |
Vehicle fitment
The manufacturer fitment list covers the 2001–2008 Ford Ranger in Edge, Sport, Tremor, XL and XLT trims.
It fits the 2001–2008 Ford Ranger in Edge, Sport, Tremor, XL and XLT trims. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Lift changes affect alignment and driveline angles, so have the front end aligned and the driveline checked after installation. Use jack stands and never work under a truck held only by a jack.
What’s included
Driver side and passenger side lift spindles, plus complete installation instructions.
Not included: Check the package contents for lift blocks and U-bolts before starting the install.









