Select your vehicle

Fabtech 4 Inch Lift Spindle – FTS1588-7

Fabtech

Shop GMC C1500 Spindle on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fabtech 4 inch lift spindle, part FTS1588-7
  • Lift height range 3 to 4.99 inches
  • One-piece cast, no-weld spindle that replaces the factory spindle
  • Shocks not included

Description

Overview

The Fabtech FTS1588-7 is a 4 inch lift spindle for 1988–1998 Chevrolet and GMC C1500 and C2500 trucks, with Tahoe, Yukon and Suburban models also listed. It directly replaces the factory spindle and has a listed lift height range of 3 to 4.99 inches.

The one-piece cast spindle can be used with Fabtech’s Performance Lift Systems or installed on a stock suspension. It adds front end ground clearance and is designed to retain factory handling characteristics.

Key features

  • One-piece cast spindle that replaces the factory spindle
  • No-weld installation
  • Engineered to accept the factory ball joints
  • Accepts stock wheels and tires
  • Works with Fabtech Performance Lift Systems or a stock OEM suspension
  • Lift height range of 3 to 4.99 inches

Shock and suspension matching

A lift spindle raises the front end, so the shocks and their mounts must reach the new geometry. Shocks that are too short can bottom out or limit suspension travel, while shocks that are too long can strain their mounts. Measure your current shocks and compare them to the added height before choosing replacements.

Many owners replace front shocks and check bump stops at the same time as a spindle install, since both affect ride height and travel. Front brake lines, steering components and driveshaft angles also change with lift, so inspect them after the first drive. The spindle works on a stock suspension as well as with a lift system, but the setup should match your goals.

  • Shock length and mounting style
  • Bump stop condition
  • Brake line length at full steering lock

Specifications

Brand Fabtech
Part number FTS1588-7
UPC 674866002838
Component Front lift spindle
Suspension type Knuckle
Lift height range 3 to 4.99 inches
Rear lift method None
Shocks included No

Vehicle fitment

The manufacturer fitment list covers 1988–1998 Chevrolet and GMC C1500 and C2500 trucks, the 1992–1998 C1500 Suburban, the 1995–1998 Chevrolet Tahoe and GMC Yukon, and single-year entries for a 1989 Chevrolet R2500 and a 1992 Chevrolet C3500.

It fits 1988–1998 Chevrolet and GMC C1500 and C2500 trucks, the 1992–1998 C1500 Suburban, the 1995–1998 Tahoe and Yukon, and the 1989 R2500 and 1992 C3500. Trucks from 1999 and later and other years fall outside this fit, so confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

The spindle is a direct replacement for the factory spindle, so it does not require welding. Because it raises the front end, have the front alignment and steering checked afterward. Shocks are not included, so check that your shocks suit the added height.

What’s included

Shocks are not included with the spindle. Check the package contents against your installation before fitting.

Not included: Shock absorbers.

SKU: FABFTS1588-7 Category:

Specification

Shipping weight 78.00 lbs
Package dimensions 17.00 × 15.50 × 11.10 in
brands

Fitment

VehicleYearsTrims
Chevrolet C15001988–1998Base, Cheyenne, Scottsdale, Silverado, WT
Chevrolet C1500 Suburban1992–1998Base, LS, LT, Silverado
Chevrolet C25001988–1998Base, Cheyenne, Scottsdale, Silverado, WT
Chevrolet C35001992Scottsdale
Chevrolet R25001989Silverado
Chevrolet Tahoe1995–1998Base, LS, LT
GMC C15001988–1998Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special
GMC C1500 Suburban1992–1998Base, SLE, SLT
GMC C25001988–1998Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX
GMC Yukon1995–1998Base, SL, SLE, SLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Fabtech FTS1588-7 fit a 1995 Chevrolet Tahoe?

Yes. The manufacturer fitment list includes 1995–1998 Chevrolet Tahoe models in the Base, LS and LT trims. Confirm your vehicle's year, model and trim before ordering.

What lift height does the FTS1588-7 spindle cover?

The spindle covers a lift height range of 3 to 4.99 inches. It is a 4 inch lift spindle that works with Fabtech Performance Lift Systems or on a stock suspension.

Are shocks included with this spindle?

No. Shocks are not included with the spindle. Check that your current shocks suit the added height, and confirm any other parts you need before fitting.

How do I know if the shocks need replacing after a spindle install?

Look for leaking fluid, worn bushings, bottoming out on bumps, or a bouncy ride. Inspect the shock mounts and bump stops as well. Shocks that do not control the new height well should be replaced with units suited to the added height.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop GMC C1500 Spindle on Amazon