Overview
The Fabtech FTS26074 is a front spindle for a 6 in. lift on the 2005–2014 Toyota Tacoma in the Base and Pre Runner trims. It raises vehicle height and increases front end ground clearance, and it is designed to keep a stock-like ride.
It is a one-piece cast spindle designed to accept the factory ball joints and stock tires and wheels. Fabtech describes its installation as no-weld.
Key features
- Designed for a 6 in. lift
- Increases front end ground clearance
- One-piece cast design
- No-weld installation
- Accepts factory ball joints
- Accepts stock tires and wheels
Alignment and ride after a lift
Raising the front end changes caster, camber and the angles of the steering and driveline parts. Even with a correctly installed spindle, the front alignment usually needs adjusting after a lift of this size, and tire wear is easier to control when the alignment is set correctly. Watch the inner tire edges during the first weeks of driving.
Factory ball joints stay in use with this spindle, so they should be inspected for play at each service. Check the brake lines, ABS wiring and sway bar links for stretch or rubbing after installation, since the front end sits in a different position. Stock tires and wheels are accepted, but larger tires may need clearance checks.
- Inspect ball joint boots and play at regular service
- Recheck wheel lug torque after the first drive
- Check brake hose length at full steering lock
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS26074 |
| UPC | 674866103115 |
| Component | Front spindle |
| Lift height | 6 in. |
| Construction | One-piece cast |
| Installation | No weld |
| Ball joints | Accepts factory ball joints |
Vehicle fitment
The manufacturer fitment list covers the 2005–2014 Toyota Tacoma in the Base and Pre Runner trims.
It fits 2005–2014 Toyota Tacoma Base and Pre Runner trims. Other Tacoma years and other Toyota models fall outside this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The spindle replaces the factory front spindle and installs without welding. Because a 6 in. lift changes front geometry, have the front alignment checked after installing.
What’s included
Check the package contents and any hardware against your installation before fitting.









