Overview
The CSS-C1-9 is a 4.5 inch lift spindle kit with cast spindles, stainless steel brake lines, coilover spacers, lift blocks, a U-bolt kit and a hardware kit.
California Super Trucks describes itself as a maker of bolt-on truck suspension and says its components use high-quality materials for durability.
Key features
- 4.5 inch lift
- Cast spindles
- Stainless steel brake lines
- Coilover spacers and lift blocks
- U-bolt kit and hardware kit
Brake lines and front geometry
Brake lines often change when the front spindles change, because the caliper sits at a new position. Stainless steel lines are common on lifted trucks since they resist swelling under pedal pressure. After the brake lines are routed and fitted, bleed the system and check the fluid level, then test the pedal before driving on the road.
Lift blocks and coilover spacers alter the spring and shock geometry, so the suspension should be checked after the new parts are fitted. A U-bolt kit must be tightened to the correct torque once the truck settles at its new height.
- Bleed the brakes after fitting new lines
- Check pedal feel before driving
- Re-torque U-bolts after the first drives
- Confirm shock length if you run coilovers
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSS-C1-9 |
| UPC | 70000526936 |
| Lift | 4.5 inch |
| Lift height range | 3 to 4.99 inches |
| Spindle type | Cast |
| Brake lines | Stainless steel |
| Suspension type | Knuckle |
| Shocks included | No |
| Rear lift method | None |
Vehicle fitment
It is a direct fit for knuckle suspensions in the 3 to 4.99 inch lift range. Check the kit against your truck before ordering.
This kit adds no rear lift. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lift spindles change front geometry, so have the alignment checked after the kit is installed. A lift also raises the center of gravity and changes handling, so drive carefully until the setup is fully adjusted.
What’s included
Cast spindles, stainless steel brake lines, coilover spacers, lift blocks, a U-bolt kit and a hardware kit. Not included: shocks.









