Overview
The Fabtech FTS4130-7 is a 3 inch lift spindle for the 1995–2004 Toyota Tacoma in Base, Pre Runner and SR5 trims. It replaces the factory front spindle to add lift and front end ground clearance, and the change does not compromise factory handling characteristics.
Each spindle is a one-piece cast part engineered to accept the factory ball joints. It installs without welding and can be used with Fabtech Performance Lift Systems or fitted directly to a stock OEM suspension.
Key features
- One-piece cast spindle that directly replaces the factory spindle
- Engineered to accept the factory ball joints
- No-weld installation
- Compatible with Fabtech Performance Lift Systems or a stock OEM suspension
- Accepts stock wheels and tires
Before you install
A lift spindle changes how the front wheel is positioned, so the work goes beyond swapping one part for another. The steering knuckle carries the hub, brake components and ball joints, and any change to its geometry shifts camber, caster and toe. Expect the front end to feel different on the road, especially at speed and during hard braking, and plan for a wheel alignment shortly after the job.
Before ordering, check the condition of the factory ball joints, tie rod ends and wheel bearings. Because this design reuses the factory ball joints, worn joints should be replaced while the spindle is off the truck. Brake lines and ABS wiring may need slack checked, and brake hose length should be verified after the front end is raised.
- Inspect the factory ball joints for play before reuse
- Replace worn tie rod ends and bushings during the same job
- Check brake hose and sensor wire length after the lift
- Recheck wheel lug torque after the first few drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS4130-7 |
| UPC | 674866009523 |
| Lift height | 3 inch |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Knuckle |
| Rear lift method | None |
| Max tire size | 30 x 9.50 |
| Wheel size | 15 x 7 |
| Backspacing | 3.75 |
| Shocks included | No |
Vehicle fitment
It fits the 1995–2004 Toyota Tacoma in Base, Pre Runner and SR5 trims.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The spindle installs in place of the factory part, so plan on removing the factory spindle and reusing the factory ball joints as the design intends. Lift spindles change front alignment, so have the alignment checked after installation. Support the front end on stands before removing the factory spindle.
What’s included
Check the package contents against your installation before starting.
Not included: shocks.









