Overview
The Fab Fours Winch Front Bumper with Full Guard in black powder coat, part number TT16-B3650-1, is a steel front bumper for the 2016–2018 Toyota Tacoma. Fab Fours designs it for strength and durability, with more tire clearance to reduce rubbing.
The bumper is built around a winch of up to 10,000 pounds and includes 90mm fog lights and 60mm turn indicator lights in injection-molded housings. It is made in the USA and is also offered in pre-runner guard and no guard versions.
Key features
- Winch ready: accepts a small frame winch up to 10,000 lb
- 3/16 inch steel construction
- 7/8 inch D-ring mounts
- Two-piece mounting system with adjustability for a custom fit
- Signature injection-molded light housings
- 90mm fog lights and 60mm turn indicator lights included
- Two-stage black powder coat
- More tire clearance than the stock bumper, which Fab Fours says helps stop rubbing
Winch and light planning
A front bumper with a winch mount puts the winch and its cable closer to the front of the truck, so the mounting points and bumper frame carry the pulling load. Choose a winch that is sized for the vehicle and the bumper’s rated capacity, and make sure the winch has the right roller fairlead and cable length for your typical recovery use.
Winch wiring and the fog and turn lights need to be routed with the bumper in place. Plan the wiring so cables stay clear of moving suspension parts and the steering linkage, and use a fused circuit for the winch. Check the connections after every rough trip, since vibration can loosen terminals.
- Match the winch size to your typical load
- Use a fused circuit for the winch and lights
- Route cables away from steering and suspension parts
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | TT16-B3650-1 |
| UPC | 5810111755 |
| Product type | Winch front bumper |
| Guard style | Full guard |
| Position | Front |
| Width | Full |
| Material | Steel |
| Steel thickness | 3/16 inch |
| Finish | Two-stage black powder coat |
| 220-250 lbs | |
| Maximum winch | 10,000 lb, small frame |
| D-ring mounts | 7/8 inch, included |
| Included lights | 90mm fog and 60mm turn indicator |
| Winch mount | Included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2016–2018 Toyota Tacoma.
Earlier and later Tacoma generations are outside the listed years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper uses a two-piece mounting system that Fab Fours says can be adjusted for a custom fit. Wiring the included fog and turn indicator lights is part of the installation, so plan the wiring to suit the lights and any local rules.
What’s included
The full guard bumper with D-ring mounts, winch mount, and the 90mm fog and 60mm turn indicator lights.
Not included: The winch itself.














