Overview
The Fab Fours GM14-A3152-1 is a heavy duty winch front bumper with a Pre-Runner grille for the 2015 to 2018 GMC Sierra 2500 HD and 3500 HD. It is steel with a black powder coat and is winch ready.
Fab Fours says its Premium winch bumper focuses on strength and durability and provides more tire clearance to eliminate rubbing. The bumper accepts winches of 16,500 lb or smaller, with 3/4-inch D-ring mounts, integrated fog and turn lights, and air ducts.
A 1/4-inch boxed mounting system with adjustability gives a custom fit, and the light housings are injection molded. The steel is a combination of 1/4-inch and 3/16-inch.
Key features
- Pre-Runner grille winch bumper for 2015 to 2018 GMC Sierra 2500 HD and 3500 HD
- Winch ready for winches up to 16,500 lb
- 3/4-inch D-ring mounts
- 90mm fog lights and 60mm turn indicator lights included
- Air ducts and injection molded light housings
- Adjustable 1/4-inch boxed mounting system
- Combination of 1/4-inch and 3/16-inch steel
- Matte black powder coat; the -B suffix means bare steel
- Made in the USA
Winch bumper setup and upkeep
A winch bumper turns the front of the truck into a recovery point, so the winch mount and the bumper steel share the load. Mount the winch to the built-in mount with the hardware supplied, and keep the cable and hook clear of the grille and lights. Check the mount bolts and winch plate after recovery use, since repeated pulls can loosen fasteners and show early cracking near the welds.
Winch choice matters as much as the bumper. Pick a winch rated for the weight the truck will pull, and use a fairlead or cable path that keeps the line centered. Keep the powder coat in good shape, because chips at the edges of the tray are where rust usually starts. Re-tighten fasteners at regular service intervals, and replace worn fairleads or damaged cable before the next recovery.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | GM14-A3152-1 |
| UPC | 5810107963 |
| Product type | Heavy duty winch front bumper with Pre-Runner grille |
| Position | Front |
| Width | Full |
| Material | Steel, 1/4-inch and 3/16-inch combination |
| Finish | 2 stage matte black powder coat |
| Winch capacity | 16,500 lb winch or smaller |
| D-ring mounts | 3/4-inch, included |
| Lights | 90mm fog lights and 60mm turn indicators, included |
| Winch mount | Included |
Vehicle fitment
It is a direct-fit front winch bumper with a Pre-Runner grille for the 2015 to 2018 GMC Sierra 2500 HD and 3500 HD.
The Sierra 1500 and earlier heavy duty trucks fall outside the model years above. Compare the year, model and trim with your truck before ordering. Sensor-equipped versions carry their own part numbers.
Installation notes
The boxed mounting system adjusts for a custom fit. Mount a winch of up to 16,500 lb to the built-in mount, and wire the fog and turn lights.
What’s included
- Front winch bumper with Pre-Runner grille
- D-ring mounts
- 90mm fog lights
- 60mm turn indicator lights
- Winch mount
Not included: The winch and its wiring.
















