Select your vehicle

Fab Fours Vengeance Series Rear (Black) – TT12-E1651-1

Fab Fours

$1,381.56In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 3:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear bumper for the 2012–2015 Toyota Tacoma
  • 11 gauge U.S. steel, 65 lb, black powder coat
  • Openings for (2) 2×2 Dually lights (lights not included)
  • Retains the factory receiver hitch

Description

Overview

The Fab Fours Vengeance Series Rear Bumper, part number TT12-E1651-1, is a black rear replacement bumper for the 2012–2015 Toyota Tacoma. It is built from 11 gauge U.S. steel in South Carolina and weighs 65 lb.

Two front-side openings leave room for (2) 2×2 Dually lights, which are not included. The bumper retains the OEM receiver hitch and wiring location and has the Fab Fours 2 stage black powder coat.

Key features

  • 11 gauge U.S. steel construction
  • Two openings for (2) 2×2 Dually lights
  • Fab Fours 2 stage black powder coat
  • Retains the OEM receiver hitch and wiring location
  • Vengeance Series styling
  • 100% made in the USA

Before you buy

A rear bumper carries more weight than most accessories, so the mounting points and the hitch area should be checked before and after the swap. Look over the frame mounts, the bolts that hold the bumper to the frame, and the hitch receiver once the old bumper is off. Surface rust or cracked welds in those areas are worth repairing before the new bumper goes on, because a steel bumper transfers load straight into the frame.

Accessories are often changed at the same time. If you plan to add a tire carrier, a hitch or rear lights later, confirm the mounting plan before you install the bumper, since those parts may need their own holes or brackets. Dually light openings are useful for planning wiring routes early. Powder coat finishes can chip during installation, so touch-up paint or a light coat of protective wax on exposed edges helps slow corrosion on a steel bumper that sees trail mud and road salt.

Specifications

Brand Fab Fours
Part number TT12-E1651-1
UPC 5810111076
Product type Rear replacement bumper
Series Vengeance
Steel 11 gauge U.S. steel
Finish 2 stage black powder coat
Weight 65 lb
Light openings (2) 2×2 Dually lights
Position Rear
Fit type Direct fit
D-ring mounts Not included
Tire carrier None
Origin Made in the USA

Vehicle fitment

Fab Fours lists part TT12-E1651-1 for the 2012–2015 Toyota Tacoma.

It fits the 2012–2015 Toyota Tacoma. The 2016–2018 Tacoma uses a different bumper. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Dually lights are added separately and are not part of the bumper. The factory hitch location is retained.

What’s included

One Vengeance rear bumper.

Not included: Dually lights.

SKU: FFITT12-E1651-1 Category:

Specification

Shipping weight 150.00 lbs
Package dimensions 89.00 × 30.00 × 12.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma2012–2015Base, Pre Runner, TRD Pro, X-Runner

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Tacoma years fit the TT12-E1651-1?

It fits the 2012–2015 Toyota Tacoma. The 2016 and newer generation is not covered by this bumper, so confirm your year and model before ordering.

Are lights included with the TT12-E1651-1?

No. The bumper has two openings for 2x2 Dually lights, but the lights are sold separately and are not part of the bumper. Check the package contents against your installation before starting.

Is the TT12-E1651-1 painted or bare steel?

It carries the Fab Fours 2 stage black powder coat. A bare steel version uses a -B suffix in the part number.

How should a steel rear bumper be maintained?

Rinse off mud and road salt after trail use, and inspect the powder coat for chips each season. Touch up exposed bare metal promptly, and check the mounting bolts for tightness after the first few drives.

How can I tell if the rear bumper mounts need attention?

Look for cracks around the bolt holes, gaps between the bumper and the frame, and rust bubbling under the paint. Any movement or squeaking when you push on the bumper means the mounts should be inspected before more driving.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon