Overview
The Fab Fours Vengeance Series front bumper, part number DR16-V4052-1, is a black powder coat, 11 ga. U.S. steel front bumper for the 2016–2018 Ram 2500 and Ram 3500.
Fab Fours builds this bumper as part of the Vengeance Series, a lightweight premium steel sensor bumper fitted high and tight to the truck’s contours. It has a center mount for a Rigid Industries 20 inch LED light bar, side mounting options for two 2×2 Dually lights and a lower cutout for airflow.
Key features
- Front bumper in a 2 stage black powder coat
- 11 ga. U.S. steel construction, made in the USA
- Lightweight: 65 lbs. with no guard, 75 lbs. with the Pre-Runner guard
- Center mount for a Rigid Industries 20″ LED light bar
- Side mounting options for two 2×2 Dually lights
- Lower cutout to provide airflow
- Bolt-on with provided brackets that tie directly to the frame
- Light mounts included; winch mount and D-ring mount not included
Sensors and frame checks
A bumper that ties into the frame needs a sound frame to work with. Before installation, look over the frame rails and existing mounting points for rust, cracks or old damage. Surface rust should be cleaned and treated, since it can spread around the bolt holes and weaken the connection.
Sensor and camera positions should also be checked before and after fitting. Parking sensors and any front camera depend on the bumper’s shape, so test them at low speed on level ground. Re-check the mounting bolts after the first miles of driving and again after heavy use, and inspect the lower cutout area for debris that can collect in the airflow openings.
- Inspect frame rails and mounting points before fitting
- Treat any surface rust around bolt holes
- Test sensors at low speed after installation
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR16-V4052-1 (also shown as FFIDR16-V4052-1) |
| UPC | 5810112752 |
| Product type | Front bumper |
| Series | Vengeance Series |
| Material | Steel, 11 ga. U.S. steel |
| Finish | 2 stage black powder coat |
| Width | Full |
| Position | Front |
| Weight | 65 lbs. (no guard); 75 lbs. (Pre-Runner guard) |
| Light mounts | Included |
| Winch mount | Not included |
| D-ring mount | Not included |
| Origin | Made in the USA |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2016 to 2018 Ram 2500 (Big Horn, Laramie, Laramie Longhorn, Limited, Outdoorsman, Power Wagon, SLT, Tradesman) and the 2016 to 2018 Ram 3500 (Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, SLT, Tradesman).
It is made for 2016 to 2018 Ram 2500 and Ram 3500 trucks only, so other models and years need a different bumper. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use fasteners of the correct grade. Because winch mounting carries heavy loads, professional installation is recommended.
- Tighten all fasteners to the correct torque for their size and grade.
- Re-check the mounting bolts after the first miles of driving and after heavy use.
- The bumper is a sensor bumper design; confirm your vehicle’s sensor and light locations before installation.
What’s included
- Front bumper with light mounts
- Provided brackets that tie directly to the frame
Not included: The Rigid Industries 20 inch LED light bar and 2×2 Dually lights are sold separately, and a winch mount and D-ring mount are sold separately too. Check the package contents against your installation before starting.









