Overview
The Fab Fours FF09-H1952-1 is a pre-runner heavy duty winch front bumper for 2009 to 2014 Ford F-150 trucks, supplied with fog and turn lights and D-ring mounts in a black powder coat.
Fab Fours says its Premium winch bumper focuses on strength and durability and provides more tire clearance to eliminate rubbing. The winch mount accepts winches up to 12,000 lb or smaller, the D-ring mounts are 3/4-inch, and air ducts and the lights are built into the design.
Owners who want recovery capability and extra front-end protection together are the target for this design. The 1/4-inch boxed mounting system is adjustable so the bumper can take the company’s signature light housings, and the bumper is also offered by Fab Fours in full guard and base versions.
Key features
- Winch ready for winches up to 12,000 lb or smaller
- 3/4-inch D-ring mounts
- 1/4-inch boxed mounting system with adjustability for custom Fab Fours injection molded light housings
- 90mm fog and 60mm turn indicator lights included
- Two-stage matte black powder coat; bare steel uses a -B suffix
- 3/16-inch steel construction
- More tire clearance
- Made in the USA
Winch bumper installation tips
A winch bumper changes the weight balance at the front of the truck, so the suspension, steering components and hood latch deserve a look once it is installed. Heavier front ends place more load on the factory springs and shocks, which is worth remembering on long trips with a winch mounted. Check the bumper bolts and mount hardware after the first few drives.
Recovery use puts sudden loads through the winch mount and the bumper steel. Use a rated recovery strap or line, keep people clear of the rope path and avoid pulling at an angle that twists the mounts. Inspect the winch mount welds and mounting brackets periodically, especially after hard recoveries or trail use.
Lights and winch wiring both draw current, so a dedicated fused circuit is worth planning before the bumper goes on. Route the harness away from hot exhaust components and moving suspension parts, and secure it with clamps so nothing rubs through over time.
- Winch mount bolts rechecked after first use
- Fused battery feed for winch and lights
- Rated recovery line and shackles
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FF09-H1952-1 |
| UPC | 5810101015 |
| Type | Pre-runner heavy duty winch front bumper |
| Position | Front |
| Width | Full |
| Material | 3/16-inch steel |
| Finish | Two-stage matte black powder coat |
| Fit type | Direct fit |
| Winch mount | Included (up to 12,000 lb winches) |
| D-ring mounts | Included, 3/4-inch |
| Lights | 90mm fog and 60mm turn indicator lights included |
Vehicle fitment
The FF09-H1952-1 fits the 2009 to 2014 Ford F-150.
The 2015 and later F-150 trucks are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The winch mounts into the bumper. A winch of 12,000 lb or smaller needs a fused battery feed, and the supplied fog and turn lights have to be wired into the truck.
What’s included
- Pre-runner heavy duty winch front bumper
- Winch mount
- 3/4-inch D-ring mounts
- 90mm fog lights and 60mm turn indicator lights
Not included: The winch and the winch wiring.


















