Overview
The Fab Fours Full Size Rear Bumper, part number CH08-W1450-1, is a matte black rear bumper for 2007–2010 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks. Its design works around the existing receiver hitch and adds D-ring recovery points.
The bumper is built from 3/16-inch formed steel and has integrated steps on either side of the tailgate. It is designed for strength and durability and gives functional rear end protection.
Key features
- Integrated steps on either side of the tailgate
- 3/16-inch formed steel construction
- 3/4-inch D-ring recovery points
- 1/4-inch keyed and gusseted mounts
- 2 stage matte black powder coat; the -B suffix denotes bare steel
- Retains the OEM receiver hitch and wiring locations
Recovery and tow use
A rear bumper takes the impact in a rear collision and gives a solid anchor for recovery work. With D-ring points on the rear, a tow strap or shackle can be attached without loading the tailgate or the factory hitch. Keep the strap rated for the load and attach it to the D-ring rather than the bumper body, so force goes through the mount instead of the thin steel edges.
Steel bumpers hold up well, but the finish is the first line of defense against rust. Look for chips in the matte black coat after trail use, and touch them up before bare metal shows. Check the keyed and gusseted mounts and their bolts periodically, since rough terrain can loosen them over time. A firmly mounted bumper keeps its alignment, and the steps stay solid for climbing in and out of the bed.
- Check D-ring welds after heavy recovery work
- Inspect tailgate step bolts every few trail trips
- Touch up chips before surface rust forms
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CH08-W1450-1 |
| UPC | 5810101190 |
| Product type | Full size rear bumper |
| Finish | 2 stage matte black powder coat |
| Steel construction | 3/16 in formed steel |
| Recovery points | 3/4 in D-rings |
| Mounts | 1/4 in keyed and gusseted |
| Position | Rear |
| Fit type | Direct fit |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
Fab Fours lists part CH08-W1450-1 for the 2007–2010 Chevrolet Silverado 2500 HD and 3500 HD and the 2007–2010 GMC Sierra 2500 HD and 3500 HD.
Light-duty 1500 pickups and 2011 and later heavy duty trucks are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The keyed and gusseted mounts are designed to fit the truck, and the factory receiver hitch and wiring locations are kept.
What’s included
One full size rear bumper, supplied with its D-ring recovery points and the steps beside the tailgate.









