Overview
The Fab Fours Full Metal Jacket Stubby Winch Front Bumper without Grill Guard, part number JK07-B1855-1, is a black powder-coated bumper for the 2007–2018 Jeep Wrangler JK, 2-door and 4-door.
This bumper is designed for maximum tire clearance and accepts winches up to 10,000 lb or smaller, including the WARN Power plant and Zeon winches. It uses an optional winch plate, JPWP-1, or Winch Modifier, JK07-B1859-1. It has 3/4 inch D-ring mounts and optional cutouts for 2×2 Rigid Industries Surface Mount Dually lights. The finish is a 2-stage matte black powder coat over 3/16 steel. A bare steel version is available under a -B part number.
Key features
- Designed for maximum tire clearance
- Accepts winches up to 10,000 lb or smaller
- Accepts the WARN Power plant and Zeon winches
- Optional winch plate (JPWP-1) or Winch Modifier (JK07-B1859-1)
- Cutouts for factory fog lights
- Optional cutouts for 2×2 Rigid Industries Surface Mount Dually lights
- 3/4 inch D-ring mounts, 3/16 steel
Winch plate or modifier choices
The right mounting accessory depends on the winch being installed. Winches differ in their mounting patterns and in how their drums and cables sit relative to the bumper face, so the winch’s own mounting template should be compared against the bumper before the hardware is ordered.
Recovery loads run through the bumper, the mounts and the frame, so the mounting hardware should be sized for the winch in use. Inspect the plate or modifier after each heavy pull, and keep the winch cable clear of the lights and the fairlead when it is not in use.
- Compare the winch mounting pattern before ordering
- Inspect the plate or modifier after heavy pulls
- Keep the cable clear of the lights
- Use recovery straps rated for the load
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | JK07-B1855-1 |
| UPC | 5810107321 |
| Position | Front |
| Width | Stubby |
| Material | Steel, 3/16 |
| Finish | 2-stage matte black powder coat (bare steel is -B instead of -1) |
| Winch rating | Up to 10,000 lb or smaller |
| D-ring mounts | 3/4 in, included |
| Winch mount | Included |
| Light mounts | Included |
| Guard | None |
| Fit type | Direct fit |
Vehicle fitment
The JK07-B1855-1 is a direct fit for the 2007–2018 Jeep Wrangler JK, in every trim and in both 2-door and 4-door body styles.
This bumper is for the JK, so a 1997–2006 Wrangler TJ or the 2018-and-later JL needs a different bumper. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Depending on the winch you choose, Fab Fours offers an optional winch plate (JPWP-1) or Winch Modifier (JK07-B1859-1).
What’s included
- Stubby winch front bumper without guard
- 3/4 inch D-ring mounts
- Winch mount
Not included: The Rigid Industries Dually lights, the optional winch plate or Winch Modifier, and the winch.
















