Select your vehicle
-13%

Fab Fours Matrix Front Bumper (Bare) – CH20-X4951-B

Fab Fours

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2020–2026 Chevrolet Silverado 2500 HD and 3500 HD
  • Full-width bare steel front bumper, winch mount compatible
  • Light mounts included; no hoop or stinger
  • Holds a 30-inch light bar, four cube LEDs and a 12,000 lb winch

Description

Overview

The Fab Fours Matrix Front Bumper in bare steel, part number FFICH20-X4951-B, is a full-width front winch bumper for the 2020–2026 Chevrolet Silverado 2500 HD and 3500 HD. It is a slim-fitting steel bumper built from the Premium Winch Bumper and Vengeance Series designs.

The Matrix bumper is winch mount compatible and has light mounts. It is equipped to hold a 30-inch light bar, four cube LED lights and a 12,000 lb winch. This version has a bare finish and no hoop or stinger.

Key features

  • Full-width front bumper made of steel
  • Winch mount compatible; equipped for a 12,000 lb winch
  • Light mounts included, for a 30-inch light bar and four cube LED lights
  • Direct-fit design for the listed Silverado HD model years
  • Bare finish, which is not painted or coated
  • No hoop and no stinger included
  • Available from Fab Fours in no guard, pre-runner guard or full guard options

Finishing a bare bumper

Bare steel rusts quickly once it is exposed to road salt, moisture and trail mud, so a protective finish should be planned before the bumper goes on the truck. Clean the surface thoroughly, remove mill scale and any surface rust, and use a primer suited to bare steel before a topcoat. Skipping prep is the most common reason coatings peel early.

Mount the bumper first when possible, then finish it. If you paint after installation, mask the sensors, light mounts and threaded holes so coatings stay off electrical connections and bolt threads. Let each coat cure fully before handling the bumper or adding a winch.

Touch-up matters over time. Chips at welds, bolt heads and the edges are the first places rust starts, so inspect them after rough use and address them promptly.

Specifications

Brand Fab Fours
Part number FFICH20-X4951-B
Product type Front bumper
Position Front
Width Full
Material Steel
Finish Bare
Winch mount compatible Yes
Light mounts Included
Includes hoop No
Includes stinger No
Fit type Direct fit

Vehicle fitment

It fits the 2020–2026 Chevrolet Silverado 2500 HD (Custom, High Country, LT, LTZ, WT) and the 2020–2026 Chevrolet Silverado 3500 HD (High Country, LT, LTZ, WT).

It is made for 2020–2026 Silverado HD trucks. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

A front bumper is a heavy part that attaches to the frame area, so use a second person or a lift. Torque all fasteners to the specified values and re-check them after the first miles of driving. If adding a winch, follow the winch’s wiring and fusing instructions, disconnect the battery during electrical work, and confirm the bumper does not block sensors, lights or cooling airflow. Check local rules on lighting and bumper modifications.

What’s included

A bare steel front bumper. Light mounts are included.

Not included: A hoop or stinger guard, winch, lights, wiring and any sensor provisions.

SKU: FFICH20-X4951-B Categories: , ,

Fitment

VehicleYearsTrims
Chevrolet Silverado 2500 HD2020–2026Custom, High Country, LT, LTZ, WT
Chevrolet Silverado 3500 HD2020–2026High Country, LT, LTZ, WT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What trucks does the Fab Fours Matrix FFICH20-X4951-B bumper fit?

It is made for the 2020–2026 Chevrolet Silverado 2500 HD and 3500 HD in the trims shown on the fitment. It is a direct-fit front bumper and is not made for the Silverado 1500. Confirm fit for your vehicle before ordering.

Can this Fab Fours bumper hold a winch?

Yes. The bumper is winch-mount compatible and holds a 12,000 lb winch, along with a 30-inch light bar and four cube LED lights. A winch within that rating is the right match for this mount.

Does the FFICH20-X4951-B include a hoop or stinger?

No. It comes without a hoop or a stinger. The bumper has a bare steel finish, and guard options are sold separately, so choose the guard you want before ordering.

Is the bumper finished or bare?

Bare. It has an unpainted steel finish, so it is not painted or powder coated. Plan on finishing the bumper yourself if you want protection against rust.

Can a bare steel bumper be painted after installation?

Yes, but preparation matters. Clean the steel, remove mill scale and rust, and use a primer suited to bare steel before a topcoat. Mask the sensors, light mounts and threaded holes so coatings stay off electrical connections and bolt threads.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon