Overview
The Fab Fours FF15-H3250-1 is a winch front bumper with a full guard for 2015 to 2017 Ford F-150 trucks, finished in matte black powder coat and ready for winches up to 12,000 lb.
This is Fab Fours’ Premium winch bumper, which the company says focuses on strength and durability and gives more tire clearance so that tires are less likely to rub. Air ducts, D-ring mounts and integrated fog and turn lights are part of the design, built from 3/16-inch steel.
The Premium winch bumper is also available without a guard or with a pre-runner guard, so the full guard version gives the most coverage at the front. The 1/4-inch boxed mounting system is adjustable to fit the signature light housings.
Key features
- Winch ready: accepts winches up to 12,000 lb or smaller
- Full guard design
- 3/4-inch D-ring mounts
- 1/4-inch boxed mounting system with adjustability for custom injection molded light housings
- 90mm fog and 60mm turn indicator lights included
- Two-stage matte black powder coat or bare steel (-B)
- 3/16-inch steel construction
- Made in the USA
Winch setup and recovery
A winch is only as good as the mounting and electrical supply behind it. Use a recovery rope or cable rated for the winch’s pull, and keep the cable spooled evenly so it does not bind. The load goes straight through the bumper, so inspect the mount bolts and the winch plate after each recovery.
Winch power should run through a fused feed sized for the winch’s current draw, with heavy gauge cable to the battery and the solenoid close to the winch. Keep the cable clear of hot exhaust parts and sharp edges, and route it so it does not rest against the radiator fan.
Practice operating the winch on a flat, open area before relying on it on a slope or in a stuck situation.
- Inspect winch cable for frays and kinks before each trip
- Keep the fused feed as close to the battery as possible
- Use a fairlead or roller to guide the cable
- Wear gloves when handling cable under load
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FF15-H3250-1 |
| UPC | 5810109752 |
| Type | Winch front bumper with full guard |
| Position | Front |
| Width | Full |
| Material | 3/16-inch steel |
| Finish | Two-stage matte black powder coat |
| Fit type | Direct fit |
| Winch mount | Included (up to 12,000 lb winches) |
| D-ring mounts | Included, 3/4-inch |
| Lights | 90mm fog and 60mm turn indicator lights included |
Vehicle fitment
Fab Fours lists FF15-H3250-1 for the 2015 to 2017 Ford F-150.
The 2018 F-150 and older 2009 to 2014 trucks use other part numbers and are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The winch mounts straight into the bumper, with room for up to 12,000 lb. Plan a fused battery feed for the winch and connect the fog and turn lights to the truck’s wiring.
What’s included
- Winch front bumper with full guard
- Winch mount
- 3/4-inch D-ring mounts
- 90mm fog lights and 60mm turn indicator lights
Not included: The winch and its wiring.












