Overview
The Dorman 618-027 is a spindle nut washer sold as a box of 5 washers, with a 24.7mm inside diameter, a 45.1mm outside diameter and a 4.7mm thickness. It fits Jeep Cherokee (XJ), Comanche, Grand Cherokee (WJ and ZJ) and Wrangler (LJ, TJ and YJ) models.
A spindle nut washer sits under the spindle nut and spreads the clamping load against the hub. Dorman says its spindle nut washers are coated for high corrosion resistance and a long service life.
Dorman adds that a kit with the nut, washer and retainer is available for some applications; this part is the washer alone, in a pack.
Key features
- Spindle nut washer
- Box of 5 washers
- 24.7mm inside diameter
- 45.1mm outside diameter
- 4.7mm thickness
- Coated for corrosion resistance.
Spindle nut and hub basics
A spindle nut washer spreads the clamping load from the spindle nut across the hub bearing area, which helps keep the hub seated and the wheel bearing preloaded. When the washer is bent, cracked or heavily corroded, the nut can loosen or the bearing can be set incorrectly. Inspect the washer faces and the hub surface whenever the spindle nut is removed.
Because the spindle nut and retainer are sold separately from this washer, plan to inspect those parts together. A worn retainer or cracked nut can undo the benefit of a good washer. Use fresh parts where the old ones show damage, and keep the mating surfaces clean so the washer sits flat against the hub.
- Check the washer for flat spots and cracks
- Clean the hub face before installing
- Replace a retainer that shows wear
- Set bearing preload using the procedure for your Jeep model
Specifications
| Brand | Dorman |
|---|---|
| Part number | 618-027 |
| UPC | 19495618270 |
| _pn | 618-027 |
| Part type | Spindle nut washer |
| Quantity | Box of 5 |
| Inside diameter | 24.7mm |
| Outside diameter | 45.1mm |
| Thickness | 4.7mm |
| Fit type | Direct fit (Dorman) |
Check the material against the washer you are replacing.
Vehicle fitment
It fits seven Jeep model lines, each with its own year range.
The manufacturer fitment list for part 618-027 covers: 1984–2001 Jeep Cherokee (XJ); 1986–1992 Jeep Comanche; 1999–2004 Jeep Grand Cherokee (WJ); 1993–1998 Jeep Grand Cherokee (ZJ); 2004–2006 Jeep Wrangler (LJ); 1997–2006 Jeep Wrangler (TJ); 1987–1995 Jeep Wrangler (YJ).
Not listed: Wrangler JK and JL, and any other make. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 24.7mm and 45.1mm diameters with your current washer before installing.
What’s included
- Box of 5 spindle nut washers
Not included: the spindle nut and retainer.









