Overview
The Genuine Packages differential cover and oil pack (part JKRUBID44DIFC2) bundles a Dana 44 Bombshell differential cover, a Dana 44 differential cover gasket and synthetic 75W-90 gear oil. The cover is the Poison Spyder Bombshell design, and its axle information lists Dana 44 front and rear axles with universal fit.
The stock covers on Jeeps are stamped sheet metal, which can be dented by a moderate rock tap and damage the ring gear, gears, locker and carrier bearings. The cover lip can also peel back and let gear oil drain out. The Bombshell is designed to resist both problems.
The cover is cast from highly ductile nodular iron, the same family of material Poison Spyder says drag racing differential housings use. A ramp profile helps a vehicle slide over trail obstacles, and recesses around the bolt heads keep them out of harm’s way. The area around the bolt ring is up to 1 inch thick, and the rest of the cover runs from 7/16 inch to 1/2 inch at the outer surface.
Key features
- Cast from ductile nodular iron
- Recessed bolt heads that guard the cover bolts from trail damage
- Ramp profile that helps a Jeep slide over rocks
- Bolt-ring section up to 1 inch thick
- Gasket and synthetic 75W-90 gear oil included in the kit
Differential protection and fluid
The differential sits low under the axle, so it is one of the most exposed parts on a trail-driven Jeep. Impacts can crack a thin cover, bend the housing or push the ring gear out of alignment. A thicker cover with recessed bolts helps it survive contact, but it does not replace careful line choice on the trail.
Check the gasket surface and cover bolts for seepage after rough trail runs. Clean the mating surface before installing a new gasket, and torque the bolts evenly in a crisscross pattern. Refill and check the gear oil level after installation, and replace fluid on the schedule the vehicle needs.
Keeping the gear oil at the correct level protects the gears and bearings. Synthetic oil is often chosen for axles that work hard because it holds up well under heat. Axle seals, the pinion seal and the breather are commonly inspected during the same service.
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | JKRUBID44DIFC2 |
| UPC | 700007721881 |
| Cover | Dana 44 Bombshell differential cover (Poison Spyder design) |
| Cover material | Cast ductile nodular iron; axle information lists steel |
| Cover thickness | 7/16 to 1/2 inch at outer surface; up to 1 inch at bolt ring |
| Axle location | Front and rear |
| Axle type | Dana 44 |
| Oil capacity | Standard capacity |
| Finish | Natural |
| Gear oil | Synthetic 75W-90, quantity 4 |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit for Dana 44 front and rear axles. Confirm the housing matches your year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One Dana 44 Bombshell differential cover, one Dana 44 differential cover gasket, and synthetic 75W-90 gear oil, quantity 4.









