Overview
The Dorman PCV grommet, part number 42344, is a rubber grommet that seals the PCV valve where it meets the valve cover on 2.5L 4-cylinder and 4.0L 6-cylinder engines. It provides an airtight seal between the elbow and the valve cover.
The oil-resistant rubber is built to handle severe heat and the temperature swings found under the hood.
Key features
- Oil-resistant rubber construction
- Leak-resistant seal for the PCV valve
- Crack-resistant for longer service life
- Press-in installation with no special tools
Replacing a PCV grommet
A PCV grommet is a small rubber seal, but it does real work. It keeps crankcase vapor moving through the PCV system instead of leaking past the valve cover, and it keeps oil and air from escaping at the joint. When the rubber hardens, cracks or swells from oil exposure, the seal can weep oil onto the engine or let unmetered air into the intake side. Those leaks often show up as a faint oil smell, residue around the valve cover edge or a rough idle that comes and goes.
Because the grommet is inexpensive and easy to reach, it is often replaced while the valve cover gasket or PCV valve is already off. Before buying, measure the old grommet’s inside and outside diameters and its thickness, then compare them with the PCV valve neck and the valve cover opening. Clean the mating surfaces thoroughly and inspect the PCV hose for cracks, since a new seal will not correct a hose that is leaking.
- Check the old grommet for hardening, cracks or oil soak
- Clean the valve cover opening and PCV valve neck before pressing in
- Replace a cracked PCV hose at the same time
- Look for oil residue around the valve cover edge after the first drive
Specifications
| Brand | Dorman |
|---|---|
| Part number | 42344 |
| UPC | 37495423441 |
| Material | Oil-resistant rubber |
| Engines | 2.5L 4-cylinder and 4.0L 6-cylinder |
| Location | Between elbow and valve cover |
| Inside diameter | 0.943 in |
| Outside diameter | 2.029 in |
| Thickness | 0.531 in |
Vehicle fitment
It fits 2.5L 4-cylinder and 4.0L 6-cylinder engines. Confirm fit for your vehicle’s year, model and trim before ordering.
Compare the grommet’s diameters with the PCV hose and valve cover on your engine before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The grommet presses into place with no special tools. Check its inside diameter against your PCV valve before pressing it in.
What’s included
One PCV grommet. No other parts are listed.














