Overview
The Timken differential bearing race is a single specialty race made for differentials with 30 spline aftermarket lockers. Named applications are the Dana 30 E locker, Dana 35 30 spline aftermarket lockers, and GM 10 bolt 98 and older with aftermarket 30 spline lockers.
Timken says its races are made from steel, precision heat treated and precision ground. No vehicle years are given, so match the race to your locker and differential before fitting.
Key features
- Single race only, not a set
- Made for 30 spline locker differentials
- Steel construction with precision heat treating and precision grinding.
- Named for Dana 30 E, Dana 35 and GM 10 bolt 98 and older applications
Race and cone matching
A differential bearing race is the outer ring that a tapered roller bearing cone runs against. The race and cone are matched as a pair, so the race must be the correct size and style for the carrier and cone you use. When one part is replaced, the other is often checked, because uneven wear on either surface can shorten the life of the whole set.
Before buying, confirm the carrier type and locker spline count, since those decide which race fits. Keep races clean and free of nicks, and use the same bearing type on both sides when the differential is rebuilt. Preload and gear mesh are set during assembly, so plan for a shop or a technician with the right tools.
- Check the race and cone for pitting or heat marks
- Match both sides of the differential to the same design
Specifications
| Brand | Timken |
|---|---|
| UPC | 68203417283 |
| Part type | Differential bearing race |
| Quantity | Single race |
| Material | Steel |
| Locker spline count | 30 spline |
| Fitment label | Universal Fit |
Vehicle fitment
Fit is set by locker type rather than vehicle, so the Dana 30 E, Dana 35 and GM 10 bolt 98 and older applications are the guide. No vehicle years or models are confirmed.
Use this race only with the 30 spline aftermarket lockers named here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm your locker is a 30 spline aftermarket unit before fitting, because the race is named only for those lockers. Bearing races are usually set up by a shop with preload and gear checks, so have the differential assembled by a qualified technician.
What’s included
1 bearing race is included.
Not included: Matching bearing cones and other differential parts are not included.















