Overview
The Crown Automotive J3171166 is a differential bearing cup, the outer race a differential bearing rides in, for Dana 35 rear and Dana 30 front differentials. It fits 1976–1986 CJ models, 1987–1995 Wrangler (YJ) and 1997–2006 Wrangler (TJ) models.
It is built to OEM specification and is a direct fit. It is also made for a wider range of Jeep models, from Cherokee (XJ) and Comanche to Grand Cherokee (WJ and ZJ) and Scrambler.
Key features
- Differential bearing cup
- Rear model 35 and front model 30 differentials
- Built to OEM specification
- Direct fit listing
- Crown Automotive part number J3171166
Setting up the differential bearings
A bearing cup is the outer race that the matching cone rides in, so the two wear together and are best judged as a pair. The cup is pressed or driven into the carrier or housing bore, and it needs to seat square with no burrs or debris under the edge. A cup that sits crooked can shorten the life of the bearing and cause noise under load.
During assembly, set the bearing preload and check the gear mesh before the final fill. Preload that is too tight generates heat, while too little allows play that shows up as clunks when shifting between drive and coast. Confirm the front and rear positions are not mixed up before pressing anything into place.
- Pitting or flaking on the cup surface
- Heat discoloration on the cone or cup
- Clicking or whining from the differential at speed
- Play in the carrier after the bearings are set
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3171166 |
| UPC | 848399058086 |
| Axle | Dana 35 rear and Dana 30 front |
| Build | OEM specification |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ), the 1981–1983 CJ5 and 1981–1986 CJ7, the 1986–1992 Comanche, the 1999–2004 Grand Cherokee (WJ), the 1993–1998 Grand Cherokee (ZJ), the 1981–1985 Scrambler, the 1997–2006 Wrangler (TJ) and the 1987–1995 Wrangler (YJ), in the trims noted for each.
Wrangler LJ models are not covered in the fit shown above. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The front and rear positions use different cups, so check whether your differential is the Dana 30 front or the Dana 35 rear before ordering.
What’s included
One differential bearing cup.









