Overview
The Daystar fluorescent orange D-Ring Isolator, part number KU70056FA, is made in the USA. It is a polyurethane isolator for standard 3/4 inch D-rings and shackles, designed to keep the D-ring from banging against the bumper while the vehicle is moving. The same isolator also helps prevent the shackle from marking the bumper finish or the recovery point.
Fluorescent orange is a high-visibility finish, so the isolator is easy to spot on the rig, whether you are checking your recovery gear in daylight or at dusk. The pair gives you two isolators for two recovery points, so you can equip both ends of a recovery setup.
It is a universal accessory, so it is not built for a single make, model or year. Compatibility comes down to the recovery hardware: a standard 3/4 inch D-ring or shackle body. Daystar also sells Winch Isolators, Jack Isolators and Lift and Leveling Kits.
Key features
- Fluorescent orange polyurethane isolator for standard 3/4 inch D-rings or shackles
- Made in the USA
- Stops D-ring rattles against the bumper while driving
- Protects anchor points and bumper finish from scratches
- Snaps on and comes off in moments
- Comes as a pair
- Limited lifetime warranty
Before a recovery pull
A recovery pull puts load through the shackle, pin and bolt at the same time. The isolator matters most during the drive before that point, when loose hardware taps against the bumper on every bump. Before you connect a strap, seat the isolator fully and make sure the pin is secure, since a sleeve that has slipped can pinch or rub.
Visibility is a practical reason some owners prefer a bright finish. A high-visibility color makes gear easier to find in a cluttered rig or in poor light, which helps when you need the shackle quickly. Keep the isolators clean of mud and grit, and rinse them after off-road runs so the surface does not wear down from abrasion.
- Check isolator seating before each pull
- Replace any piece that splits or flattens
- Rinse grit off after mud runs
- Keep a spare set with the recovery kit
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70056FA |
| UPC | 618089004859 |
| Color | Fluorescent Orange |
| Material | Polyurethane |
| Origin | Made in the USA |
| Fits | Standard 3/4 inch D-rings or shackles |
| Quantity | Pair |
| Warranty | Limited lifetime |
Vehicle fitment
No vehicle is named, and no year or chassis range applies. It is a universal accessory, so the recovery point decides fit: a standard 3/4 inch D-ring or shackle.
Measure the shackle body before choosing this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Seat the isolator fully on the shackle body before any recovery pull. After a trail run, check that it has stayed in place, since a loose isolator can still rattle.
What’s included
A pair of fluorescent orange D-Ring Isolators.
Not included: D-rings, shackles, straps or winch hardware.









