Overview
The Daystar D-Ring Isolator (part number KU70056WH) is built from durable polyurethane to fit any standard 3/4-inch shackle. It fits over the shackle body and keeps the metal from knocking against the bumper, a common source of noise when the vehicle is in motion.
The isolator also helps protect the bumper surface from scratches caused by D-ring contact. It snaps into place and can be removed in moments. The isolators are sold in pairs and are part of a wider off-road range that includes winch isolators, jack isolators and lift kits.
Key features
- Polyurethane construction
- Snaps onto standard 3/4-inch shackles and D-rings
- Prevents rattles from shackle contact
- Protects bumper surfaces from scratches
- Sold as a pair
- Daystar part number KU70056WH
Choosing the right setup
Before buying any shackle isolator, look at the shackle itself. A round-bow shackle and a D-shaped one meet the bumper at different points, so the sleeve needs to cover the area that actually strikes. Pay attention to the pin as well, since a loose or worn pin lets the shackle move more than the isolator can absorb. A snug pin keeps the sleeve where it belongs.
The isolator is one part of a recovery setup. Shackles should be rated for the load they will carry, and they should not be swapped for lighter hardware just because a sleeve is fitted. Keep the winch line, strap and recovery points in good shape too, because a damaged point can cause more trouble than rattling. When you plan a rig upgrade, check whether the bumper mounts or tow points need work first.
- Match the sleeve to the shackle diameter
- Check the pin fit before each trip
- Keep shackles rated for your recovery load
- Inspect recovery points when you replace shackles
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70056WH |
| UPC | 618089005351 |
| Material | Polyurethane |
| Shackle size | Standard 3/4-inch D-rings or shackles |
| Quantity | Sold as a pair |
Vehicle fitment
It is a universal fit and is not designed for one vehicle, so it can be used on any rig with a standard 3/4-inch recovery shackle or D-ring.
Confirm the shackle diameter before ordering, since it is sized for standard 3/4-inch hardware.
Installation notes
The isolator snaps into place and can be installed or removed in moments. Seat it fully over the shackle before each recovery so no metal is exposed to the bumper.
What’s included
A pair of Daystar D-Ring Isolators.









