Overview
The Daystar PAPLS105 is a 5-inch premium lift system for the 1995–1999 Chevrolet Tahoe, the 1995–1999 Chevrolet K1500 Suburban and the 1995–1999 GMC Yukon. It combines a body lift with a leveling system to raise the vehicle 5 inches and allow the use of 33-inch diameter tires on the factory rims.
The kit does not alter the OEM suspension geometry or the factory StabiliTrak parameters. Because it is a body lift rather than a suspension lift, it keeps the center of gravity lower. It fits 4WD models with gasoline engines only, and it does not fit Denali models. Installation takes about 9 hours.
Key features
- 5-inch lift without modifying existing suspension components
- Forged torsion bar keys for the leveling portion
- Fiberglass reinforced nylon lift blocks
- 3/16-inch laser cut, powder coated bumper relocation brackets
- CNC machined and zinc plated steering extension
- Urethane Gap Guard wheel well extensions
Body lift care and checks
A body lift raises the cab and bed off the frame with blocks placed between the body mounts and the frame. Because the suspension stays stock, the ride and handling stay close to the original setup, but the new height changes how the body sits over the chassis. Wiring harnesses, fuel and brake lines, and the exhaust all need to be checked for stretch and rubbing after the body moves.
Body lift kits that include a leveling system and a steering extension also change how the front end is loaded, so the alignment should be verified once the work is done. Over time the nylon blocks and bracket fasteners can loosen, especially on trucks used off road. Schedule a recheck of all hardware at each oil change and after any rough trail run.
- Inspect wiring and lines for stretch after the body is raised
- Check the steering extension and bumper brackets for play
- Verify alignment once the front end is set
Specifications
| Brand | Daystar |
|---|---|
| Part number | PAPLS105 |
| UPC | 618089008833 |
| Lift height | 5 inches |
| Maximum tire diameter | 33 inches |
| Lift blocks | Fiberglass reinforced nylon |
| Bumper brackets | 3/16-inch laser cut, powder coated |
| Steering extension | CNC machined, zinc plated |
| Installation time | About 9 hours |
| Drivetrain and engine | 4WD, gasoline only; not for Denali |
Vehicle fitment
It fits the 1995–1999 Chevrolet K1500 Suburban, the 1995–1999 Chevrolet Tahoe and the 1995–1999 GMC Yukon.
Other model years are not covered, and the Chevrolet C1500 and 2000 and later Tahoe and Yukon are not included. It is not for diesel or Denali models. Verify the year, model and drivetrain against your truck before ordering.
Installation notes
This is a body lift and leveling system, so the job is substantial: the kit includes lift blocks, bumper relocation brackets and a steering extension that all need to be fitted. Allow about 9 hours for installation.
What’s included
Forged torsion bar keys, fiberglass reinforced nylon lift blocks, bumper relocation brackets, a steering extension, extension brackets, urethane Gap Guards and high strength hardware.








