Overview
The Daystar PA10163 is a 3-inch body lift kit from Daystar. A body lift raises the body above the frame, and this kit includes blocks, a steering extension, front and rear bumper brackets and all required hardware.
The kit includes blocks, a steering extension, front and rear bumper brackets and the required hardware. Manual transmission vehicles need gear shift extension PN[4701], which is not included with the kit.
Key features
- 3-inch body lift
- Front and rear bumper brackets
- Steering extension included
- Blocks and all required hardware included
- Manual transmission requires gear shift extension PN[4701]
Choosing a lift height
A 3-inch body lift raises the body above the frame, which changes how the body, steering and brake lines sit. It is a different job from a suspension lift because the springs and shocks stay the same. Before installing, measure the clearance between the body and the frame and the room available for your tires. Note any binding in the steering as you turn to full lock.
Body lifts pair well with a steering check and a driveline check. Raising the body can change the angle of the driveshaft and transfer case, which may cause vibration at speed. Shifter linkage and cables may also need adjusting. Recheck the hardware after the first few drives and keep an eye on the brake lines for stretching.
- Check the steering for binding at full lock
- Measure driveline angles after installation
- Inspect brake lines and wiring for stress
Specifications
| Brand | Daystar |
|---|---|
| Part number | PA10163 |
| UPC | 618089006709 |
| Lift height | 3 in. |
| Included | Blocks, steering extension, front and rear bumper brackets, all required hardware |
| Manual transmission | Requires gear shift extension PN[4701] |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Manual transmission vehicles need the PN[4701] gear shift extension for this lift, which is not included. Body lifts also change body-to-frame height, so check steering and brake line length after installing.
What’s included
Blocks, steering extension, front and rear bumper brackets and all required hardware.
Not included: the gear shift extension PN[4701], which manual transmission vehicles require.









