Overview
The Daystar PA10153 is a 3 inch body lift kit, part number PA10153. It comes with a steering extension, front and rear bumper brackets, blocks, a parking brake bracket and all required hardware. Body lifts keep the factory axles and springs in place while raising the body, which adds tire clearance. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- 3 in. lift height
- Parking brake bracket included
- Front and rear bumper brackets included
Parking brake and bracket routing
A parking brake bracket keeps the emergency brake cable or line supported when the body moves upward on the frame. Because the cable run is longer or shifted after a body lift, it should be checked for slack, kinks and contact with the frame, driveshaft or exhaust. Proper routing protects the cable from wear and keeps the parking brake working as intended.
Bumper brackets and blocks relocate the bumper and body mounts, so the same checks apply to body-mounted wiring, brake hoses and fuel lines. Check for tension after the first drive, and recheck the bracket hardware after the vehicle has been driven on rough roads. Worn or cracked brackets should be replaced rather than bent back into shape.
- Test the parking brake before every trip after installation
- Inspect cable grommets for chafing
- Recheck bracket bolts after the first drive
Specifications
| Brand | Daystar |
|---|---|
| Part number | PA10153 |
| UPC | 618089006693 |
| Lift height | 3 in. |
Vehicle fitment
Select the PA10153 only after matching it to your vehicle’s year, model and trim.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Steering extension, front and rear bumper brackets, blocks, parking brake bracket and all required hardware.









