Overview
The Daystar PA733 is a 3 inch body lift kit, part number PA733, sold without bumper brackets. It raises the vehicle body away from the frame to create tire clearance, leaving the suspension geometry untouched. It is a direct-fit design, so confirm your year, model and trim before buying.
Key features
- Body lift with a 3 in. lift height
- Direct fit design
- Bumper brackets not supplied
Planning the install
Body lifts change the height of the cab and bed while leaving the factory suspension geometry as it was. The axles and springs stay in place, but the lines and wiring that run to the body still need attention. Mark each line before disconnecting it and label connectors so you can reroute them cleanly.
Keep the lift in mind when you choose tires, since larger tires add rotating mass and change gearing. Test drive on low-speed roads after installation and listen for rubbing or knocks. Bumper brackets, if you add them, should be checked for clearance against the new body position before tightening. Take your time with the first inspection, since small adjustments are easier to make before heavier use.
Specifications
| Brand | Daystar |
|---|---|
| Part number | PA733 |
| UPC | 618089005993 |
| Lift height | 3 in. |
Vehicle fitment
Check the covered applications against your vehicle before selecting this kit. Match your year, make, model and trim to the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a body lift kit with no bumper brackets.
Not included: Bumper brackets.









