Overview
The Daystar PA60073 is a 3 inch body lift kit, part number PA60073. It includes a steering extension, front bumper brackets, blocks and all required hardware. It is a direct-fit design, but no vehicle is named, so confirm fit separately.
Key features
- 3 in. of body lift height
- Steering extension included
- Front bumper brackets included
- Blocks and all required hardware listed
Steering and block checks
Blocks are the spacers that set the body height, so their seating matters as much as the height itself. Confirm each block sits flat and that its hardware is tight before lowering the vehicle. Uneven seating can leave the body tilted, which shows up as uneven gaps at the doors.
The steering extension in this kit changes the steering link, so centering and free play need a check after installation. Watch for a wheel that pulls to one side or a steering wheel that sits off center. Front bumper brackets share the load with the blocks, so inspect them after the first few drives and retighten the bolts.
- Check block seating before lowering
- Recheck steering centering after the first drive
Specifications
| Brand | Daystar |
|---|---|
| Part number | PA60073 |
| UPC | 618089006952 |
| Lift height | 3 in. |
Vehicle fitment
No vehicle is named for this kit. Confirm fit for your year, model and trim before ordering the PA60073.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The included steering extension should be checked for steering centering and free play once the kit is installed. Verify that each block and bracket is seated before lowering the vehicle.
What’s included
The kit includes a steering extension, front bumper brackets, blocks and all required hardware. Check the packing list for rear bumper brackets when the kit arrives if your install needs them.









