Overview
The Dana Spicer SPL55-3X is an O.E.M replacement heavy duty U-joint for the Dana 60 axle. It replaces the discontinued D/S5-806X, so it is the joint to select when that number appears on an old part.
The joint has a forged body and improved seals. It has no lube channel, a design intended to help prevent breakage on high performance engines and big tires.
Key features
- Forged cross heavy duty body
- Perma-lube improved seals for long service life
- Inside snap ring design
- Replaces the discontinued D/S5-806X
- No lube channel, not lubeable
Before you buy
A U-joint lets the driveshaft carry power through an angle as the suspension moves. Under load it sees more stress than most driveline parts, so a worn joint often shows up as vibration at speed, a clunk when the drivetrain loads or unloads, or a grinding noise at low speed. Check the joint by hand for play before deciding whether it needs replacing.
When a joint is replaced, look at the yokes and companion flanges for wear, and inspect the other joints in the same shaft. Replacing the joints as a set avoids a second tear-down soon after.
Because this joint is sealed and cannot be greased, check the seals at each inspection. A seal that has torn or leaked means the joint has lost its lubricant, and replacement is the practical fix.
- Check yoke bores for wear before pressing in a new joint
- Match the cup size and snap ring spacing to the axle
- Clean the yoke before installing the new cross
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | SPL55-3X |
| UPC | 23913121310 |
| Application | Dana 60 axle |
| Cup size | 1.375in |
| Snap ring to snap ring | 3.00in |
| Snap ring style | Inside snap ring |
| Replaces | D/S5-806X (discontinued) |
| Lubeable | No |
| Highway rated | Yes |
| Fitment basis | Universal fit |
Vehicle fitment
It is a universal fit for the Dana 60 axle. Its 1.375in cup size and 3.00in snap ring to snap ring spacing are the measurements to match against your axle.
Dana 30 and Dana 44 joints are not covered by this Dana 60 listing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the joint is not lubeable, it has no grease channel to service through. Confirm the 1.375in cup size and 3.00in snap ring spacing fit the Dana 60 axle before installing.
What’s included
No hardware is named beyond the joint itself.








