Overview
The Dana Spicer Dana 44 3.73 Ratio Ring and Pinion Kit, part number 706017-4X, is a 3.73-ratio gear set for Dana 44 front or rear axles.
Dana Spicer makes the set in a popular replacement ratio. The company also says its gears are built to the same design as the factory gears in Dana axles.
Key features
- 3.73 gear ratio
- Dana 44 axle type
- Front or rear axle location
Choosing a gear ratio
Moving to a numerically higher ratio changes how the engine turns at a given road speed, which affects acceleration, cruising, and fuel use. Tire size matters just as much, because larger tires lower the effective gearing and smaller tires raise it. Think about how the vehicle is used most, whether that is towing, trail work, or long highway runs, before settling on a ratio.
Ring and pinion gears are a set, so the ring gear and pinion should always be replaced together. Check the carrier bearings and the pinion depth setup before reinstalling, and make sure the gear oil is the type the axle needs. A short run-in period with moderate loads lets the teeth settle and gives an early chance to catch noise or heat problems.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 706017-4X |
| Axle type | Dana 44 |
| Gear ratio | 3.73 |
| Axle location | Rear or front |
Vehicle fitment
It fits Dana 44 axles and is not tied to one vehicle. Check the axle and current ratio before installing.
Installation notes
Gear sets need professional setup for mesh and preload, and they should be run in during a break-in period.












