Overview
The Crown Automotive 68004085AA is a complete front ball joint assembly for the 2007-2018 Jeep Wrangler JK, 2-door and 4-door models. It is a ball joint kit with both upper and lower ball joints, supplied per side.
The kit is for the front axle, with Dana 44 JK and Dana 30 JK axle types. The ball joints are not lubeable, so they have no grease fitting. It is a direct fit for the Wrangler JK.
Ball joints connect the steering knuckle to the axle and carry steering and suspension loads, so worn joints can cause loose steering and uneven tire wear. This kit suits a Wrangler JK owner replacing worn front ball joints on one side.
Key features
- Complete ball joint assembly with upper and lower ball joints
- Supplied per side
- Front axle position
- Fits Dana 44 JK and Dana 30 JK axle types
- Not lubeable
- Direct-fit replacement for 2- and 4-door models
Front joint wear and replacement
Worn front ball joints often make themselves known through a wandering steering wheel, a clunk over bumps, or tires that wear on the inner or outer edge. Because the joint carries the weight of the front end, play that seems minor can grow quickly. A joint that cannot be greased has no way to be serviced, so wear calls for replacement rather than maintenance.
When replacing one side, inspect the opposite joint at the same time and check the tie rod ends and control arm bushings, since worn parts often sit together. Look for a dry or torn dust boot and confirm the joint has no play before removing it. An alignment check after the work helps the new joints wear evenly.
- Check the opposite side and tie rod ends
- Look for play in the joint by hand
- Replace the joint, not just the boot
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68004085AA |
| UPC | 848399048049 |
| Part type | Complete ball joint assembly (ball joint kit) |
| Contents | Upper and lower ball joints |
| Quantity | Per side |
| Position | Front |
| Axle location | Front |
| Axle type | Dana 44 JK, Dana 30 JK |
| Lubrication | Not lubeable |
| Fit type | Direct fit |
| Distributor part number | CRO68004085AA |
Vehicle fitment
The manufacturer fitment list for the Crown 68004085AA includes:
- 2007–2018 Jeep Wrangler (JK) (70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X)
The coverage runs from 2007 to 2018 for the Wrangler JK, and it does not cover the TJ, LJ or JL. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Ball joints are a steering and suspension safety item, so professional installation is recommended, ideally with a press and a ball joint separator.
Support the axle on jack stands, torque the joint nuts to the value in the service procedure, and have the alignment checked afterward.
Re-check the nuts after the first drive. Lift height and ride height rules differ by state, so check yours.
What’s included
Upper and lower ball joints for one side.
Not included: Hardware, grease and tools are not included.









