Overview
The Rigid Industries SR-M Series Pro Diffused LED Light in white, part number 972513, is a compact single-row light from the mini line. It mounts flush with a clear lens and a rectangular housing, and its diffused optic spreads light evenly for close-range work around a vehicle.
The SR-M PRO is a Single Row-Mini Professional Race Output light. Improved LED technology gives it up to 111 percent more raw lumens than before while keeping the small size. It suits flood lighting on a toy hauler, handlebar mounting on motorcycles and other power sports vehicles, and back bumper lighting on automotive use.
Key features
- Diffused optic for even, close-range light
- Single-row mini housing in a rectangular shape
- Up to 111 percent more raw lumens than before.
- Flush mount with a clear lens
- New branding and blacked-out circuit boards on the current design
- Same build quality as Rigid’s other lighting products, per the company
Single-row mounting choices
A single-row light fits places where a full bar would be too long. Corners of a roof rack, the rear of a camper, the back of a utility body, or the side of a trailer are all common spots. Because the housing is small, a single-row light is easy to aim, and several can be grouped to build up light where one would not reach. Plan the layout on paper first so the wires can run together without crossing hot or moving parts.
Flush mounting is the cleanest look but asks for care at the cut. Mark the opening, drill pilot holes inside it, and test-fit the housing before finishing the edge. Seal the gap around the housing, since water and mud that get behind the lens are hard to remove. Power sports and motorcycle installs often need a bracket instead, so check that the bracket holds firm under vibration before riding.
- Mark and test-fit the cut-out before drilling
- Use dielectric grease on the connectors
- Re-check the mount after the first few trips
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 972513 |
| Series | SR-M Series Pro |
| Light type | LED light bar, sold as a single light |
| LED arrangement | Single row |
| Light shape | Rectangular |
| Mounting | Flush |
| Lens color | Clear |
| Beam pattern | Diffused |
| Finish | White |
| Bulb type | LED |
Vehicle fitment
The SR-M PRO is a universal fit and is not built for one vehicle. Because it mounts flush, the panel opening has to match the housing, and the owner chooses the placement for each vehicle or machine.
Installation notes
A flush mount requires a cut-out in the mounting surface, so measure the panel and plan the wire route before drilling. Wire the light through a fused circuit and check local rules on driving lights before using it on a road vehicle.
What’s included
The item is a single flush-mount light. No wiring harness or mounting bezel is listed, so check the package contents before fitting.
Because the SR-M PRO is a single row, it suits spots where a longer bar will not fit, and Rigid’s choice of optics lets the beam match the job.









