Overview
The Rigid Industries SR-Series SR-MF Single Row Mini 60 Deg. Diffusion LED Light is a compact flush-mount light with a 60-degree diffusion beam. It uses three white LEDs, and the Specter optic produces 1500 raw lumens from the small housing.
The SR-MF is ultra low power and runs on a 7 to 36 VDC input. It has a 50,000-hour life, compared with about 1,000 hours for halogen and 5,000 hours for xenon. It has no hot spots and no bouncing beams, starts instantly and is rated IP68.
The kit includes a plug-and-play wiring harness, a switch and a cast bracket, and the housing is unbreakable polycarbonate with a durable polyester powder-coat finish. The diffused pattern gives wide, even coverage at close range rather than reach down the trail.
Key features
- 60-degree diffusion beam
- Three white LEDs
- 1500 raw lumens with the Specter optic.
- Flush-mount design
- Plug-and-play harness, switch and cast bracket
- IP68 rating and 50,000-hour life
Flush mounting basics
A flush light sits level with the panel, which keeps it low-profile and protected from brush. The panel must be solid and free of hidden wiring or fuel lines behind the cut. Mark the opening carefully, cut it cleanly and deburr the edge before fitting the housing, so the light seats flat without gaps.
Diffusion lights suit close, wide work such as lighting a camp area, a trailer hitch or the ground beside the vehicle. For reach down the trail, a spot or combo light is a better match. Many owners pair a diffusion light with a longer-reaching bar to get both wide coverage and distance.
- Check behind the panel before cutting
- Deburr the cut edge for a flush fit
- Seal the edge if the panel gap allows water in
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774027833 |
| Series | SR-MF Single Row Mini |
| Light type | LED light, sold as a single light |
| Light shape | Square |
| Mounting | Flush |
| Beam pattern | 60-degree diffusion |
| Optic | Specter |
| Raw lumens | 1500 |
| LED count | 3 white LEDs |
| Input voltage | 7 to 36 VDC |
| Ingress rating | IP68 |
Vehicle fitment
Built as a universal part, the mini diffusion light is not made for one vehicle. Because it mounts flush, the panel opening has to match the small housing, so the owner checks the surface on each vehicle before cutting.
Installation notes
Cut a clean flush opening, then run the wiring through the included harness and switch. Keep the cable clear of moving parts and heat, and check local rules on driving lights before using the light on a road vehicle.
What’s included
The kit includes the mini diffusion light, the plug-and-play wiring harness and switch, and the cast bracket.









