Overview
The Rigid Industries E-Series 10 Deg. Spot/20 Deg. Flood Combo LED Light, 50-inch version, is a single light bar with a combination beam. Its hybrid optics give a 10-degree spot pattern and a 20-degree flood, so the bar reaches down the trail while still lighting the ground close to the vehicle.
The bar has 100 white LEDs and a 50,000-plus hour LED lifespan. It starts instantly, has over and under voltage protection and uses a durable polycarbonate lens. The housing includes integrated thermal management and a GORE pressure equalizing vent, and it is engineered and assembled in the USA.
Key features
- 10-degree spot and 20-degree flood combo beam
- Hybrid optics
- 50,000-plus hour LED lifespan
- Instant on and off with no warm-up
- Over and under voltage protection
- Durable polycarbonate lens and GORE pressure equalizing vent
Fitting a long light bar
A long bar puts more load on its bracket and on the surface it sits on, so mounting points matter more than with a small light. Choose a location that clears the hood, the grille and any roof rack or winch, and confirm that the bracket can carry the bar’s weight at the angle used. Long bars are commonly mounted to a roof or frame crossmember rather than a thin panel.
Wiring a long bar works best with a single fused feed and a relay, so the switch carries no heavy current. Route the cable with enough slack for suspension travel. Tighten bracket fasteners after the first few trail runs, and look for chafing where the cable crosses edges. Keeping the lens clean keeps the beam even across the full length.
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774029165 |
| Series | E-Series |
| Light type | LED light bar, sold as a single bar |
| Size | 50 inch |
| Light shape | Rectangular |
| LED count | 100 white LEDs |
| Beam pattern | Combo: 10-degree spot, 20-degree flood |
| Mounting | Surface, bracket |
| Lens color | Clear |
| Lens material | Durable polycarbonate |
| Finish | Black |
Vehicle fitment
This is a universal-fit combo bar, so it is not built for one vehicle. A bar this long needs a bracket location with room on the bumper, roof or frame, and the owner chooses that spot.
Installation notes
Plan the bracket spot for a 50-inch bar before drilling, and use a fused circuit sized for the bar’s load. Keep the wiring clear of moving parts, and check local rules on driving lights before using the bar on a road vehicle.
What’s included
One 50-inch light bar is the package. Check the package contents against your installation before starting, including any harness or bracket.









