Overview
The Rigid Industries Ignite LED Backup Light Kit, part number 20641, is a pair of small flush mount LED lights for adding backup lighting to a vehicle. Each light has a diffused beam pattern, a black finish and puts out 1000 raw lumens.
Rigid says most vehicles have inadequate backup lighting, which can be a safety problem, and that the Ignite Backup Kit makes it easy to add compact, powerful lighting. Each light measures approximately 1.4 x 1.4 x 2 in and uses less than one amp, so Rigid says powering the pair is often as simple as tapping into the vehicle’s existing backup light circuit.
Key features
- Pair of Ignite LED lights with a diffused beam pattern
- 1000 raw lumens per light
- Flush mount style in black
- Low minimum voltage: 6-28 VDC
- IP68 compliant
- Each light draws less than one amp
- Small size, approximately 1.4 x 1.4 x 2 in
- Mounting brackets and related hardware included
Wiring and mounting tips
Backup lights are most useful when they light the ground behind the vehicle without shining into other drivers’ eyes. Pick a flat, solid spot that gives a clear view of the area, and check that the mounting surface can take the light and bracket without flexing. Measure the clearance behind the panel before drilling anything.
Power for added lights should come from a fused circuit. Tapping the reverse light wiring is a common approach, but a relay is often cleaner because it keeps added current off the factory circuit. Route all wires through grommets, secure them away from heat and moving parts, and seal connections against moisture.
- Choose a flat mounting spot with a clear view behind
- Use a fuse close to the power source
- Seal connectors and grommets against water
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774014994 |
| Product type | LED backup light kit |
| Series | Ignite |
| Beam pattern | Diffused |
| Brightness | 1000 raw lumens |
| Bulb type | LED |
| Lens color | White |
| Light shape | Round |
| Mounting type | Flush mount |
| Finish | Black |
| Size (approximate) | 1.4 x 1.4 x 2 in |
| Operating voltage | 6-28 VDC |
| Current draw | Less than one amp per light |
| Ingress protection | IP68 compliant |
| Supplied as | A pair |
Vehicle fitment
The Ignite backup light kit is a universal kit, so it can be added to most vehicles that have a backup light circuit. Check for a flat mounting spot that suits the 1.4 x 1.4 in flush mount lights.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fuse the backup light circuit and run the wiring through grommets, away from exhaust parts and moving suspension. Use the vehicle’s reverse light circuit or a relay as the lights’ instructions direct. Check local rules on auxiliary lights that shine to the rear.
What’s included
- Two Ignite LED lights (flush mount, black)
- Mounting brackets and related hardware
Not included: Wiring harness.




















