Select your vehicle

Curt Manufacturing Hitch Pin – 21582

Curt Manufacturing

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Curt Manufacturing hitch pin, part number CRT21582
  • Listed with universal fit; no specific vehicles or receiver sizes named
  • Brand: Curt Manufacturing; category: drop hitches and ball mounts

Description

Overview

The Curt Manufacturing 21582 is a hitch pin for drop hitches and ball mounts, part number CRT21582. Curt Manufacturing is the brand, and the product is filed under towing drop hitches and ball mounts.

Confirm the pin matches your drop hitch or ball mount before installing it, since the vehicle and receiver size must line up.

Pin and receiver matching

A pin that drops into a drop hitch or ball mount has to match the receiver opening exactly, so the hole diameter is the first thing to measure. A pin that is too small can rattle or pull free, while one that is too large will not seat. Measure the hole in your receiver before choosing a replacement.

Clean out grit and rust from the receiver and the hitch hardware before fitting. Check the pin for bends and wear at its tip, and replace it if the end is flattened. Pair the pin with its retaining clip or lock, and check both after each trip, especially on rough roads. Drop hitches and ball mounts carry the trailer load through these pins, so a loose fit is worth fixing right away.

Specifications

Brand Curt Manufacturing
Part number CRT21582
Fitment Universal Fit

Vehicle fitment

The fit is universal, and no vehicles or model years are assigned to this pin. Match the pin to your receiver and hitch before use.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Look over everything in the package before fitting, including any clip or retainer you plan to use.

Questions & Answers

What is the Curt Manufacturing 21582 hitch pin?

It is a hitch pin for drop hitches and ball mounts, part number CRT21582, from Curt Manufacturing. It is universal fit. Confirm pin diameter, material and finish against your hitch before use.

Does this hitch pin fit my vehicle?

It is universal fit and is not tied to a specific vehicle. A hitch pin has to match the receiver and drop hitch or ball mount it secures, so confirm your receiver size and hitch setup before ordering.

What is the part number for the Curt 21582 hitch pin?

The part number is CRT21582, and Curt Manufacturing is the brand. The short number 21582 is the model number of this hitch pin.

Can a hitch pin be reused after it has been removed?

Yes, if it is straight, clean and free of corrosion. Check the tip and the retaining end first, and replace the pin if it is bent or worn. Reuse only with a clip or lock that still holds it firmly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon