Overview
The Currie CE-9907-17 is an Antirock off-road sway bar kit designed to replace the stock Jeep sway bar, and it carries a Universal Fit tag. Balanced front and rear suspension performance and more traction from even weight distribution over all four tires are the intended goals. The bar is made from SAE 4130 heat-treated steel, chosen for strength.
Key features
- Designed to replace the stock Jeep sway bar
- Balances front and rear suspension performance
- Made of SAE 4130 heat-treated steel
- Universal Fit marking
Sway bar swap considerations
A sway bar limits body roll in corners by linking the left and right sides of the suspension. Swapping it for an off-road bar changes how the axle and wheels move against each other, so the bar’s length, shape and mounting points should match the vehicle it goes on. Stock brackets and links are designed around the original bar, so clearance checks matter after the change.
Rubber bushings and end links are common wear points on sway bar systems, and they often need replacing during a swap. Check the bar’s ends for bending or cracking and look at the frame mounts for corrosion. After installation, verify tire clearance through full suspension travel, and check that the links move freely without binding.
- Replace worn bushings and end links
- Check frame mount condition
- Confirm clearance through full travel
- Recheck alignment if links are changed
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9907-17 |
| UPC | 70000709815 |
| Material | SAE 4130 heat-treated steel |
| Fitment tag | Universal Fit |
Vehicle fitment
No year, make, model or trim is identified for the CE-9907-17. It is designed as a stock Jeep sway bar replacement, and the Universal Fit tag is a starting point, so confirm the bar fits your vehicle before installing.
A bar meant to replace a stock Jeep sway bar may not suit other Jeep generations or non-Jeep vehicles. Verify the year, model and trim of your vehicle before purchase.
Installation notes
Plan for bushings, hardware and mounting parts, which may need to be sourced separately. Because the bar replaces a stock part, check clearance around the links and frame after fitting.
What’s included
Check the package contents before starting, including bushings, hardware and instructions.









