Overview
The Warrior Products 122 is a pair of gray hammertone MIG-welded rear spring shackles with no lift for the 1987–1995 Jeep Wrangler (YJ).
The shackles are jig-built and MIG-welded, and they come with all of the mounting hardware needed for installation. They are sold as a pair in gray hammertone. This version is a rear shackle with no lift.
A spring shackle connects the rear of the leaf spring to the frame and lets the spring lengthen as it flexes. Replacing a worn shackle restores that movement, and a kit without lift keeps the original ride height.
The kit is made for the YJ Wrangler and is sold as a pair, so both rear springs can be replaced together. It comes in gray hammertone, and a gold zinc finish is also available in the brand’s range.
Key features
- Gray hammertone finish
- MIG-welded, jig-built construction
- Rear position with no lift
- Complete with all mounting hardware
- Supplied as a pair
- Direct fit
Shackles and spring wear
A spring shackle lets the rear leaf spring change length as the axle moves over bumps. Over time the bushings or bolts at the shackle wear, and the Jeep starts to feel loose. Clunking over bumps, wandering on the highway and uneven tire wear can all point to worn shackles or spring eyes that are no longer held tightly.
Shackles are often replaced alongside the spring bushings, spring pins and U-bolts, since these parts share the same load. When installing a new pair, inspect the frame mounts and spring eyes for cracks or wear. Keep the hardware clean and check it at each oil change, because loose bolts are an early sign of trouble.
- Listen for clunks over bumps and at low speed
- Check the spring eyes and bushings for play
- Inspect the frame mounts for cracks
- Re-torque the hardware after the first drives
Specifications
| Brand | Warrior |
|---|---|
| Part number | 122 |
| UPC | 63414601220 |
| Product type | Leaf spring shackle kit |
| Position | Rear |
| Lift | None |
| Finish | Gray hammertone |
| Construction | MIG-welded, jig-built |
| Hardware | All mounting hardware included |
| Quantity | Supplied as a pair |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Warrior 122 covers the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
this product does not cover the Wrangler TJ, LJ, JK or JL, and it is a no-lift rear shackle, so it is not a lift kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension parts affect steering, braking and handling, so professional installation is a good choice. Support the vehicle on jack stands rather than a jack alone, torque every fastener to specification, and re-check the torque after the first miles of driving. Have the alignment checked after suspension work, and check local rules on vehicle height.
What’s included
- Pair of rear spring shackles in gray hammertone
- All mounting hardware









