Overview
The Crown Automotive transmission oil pan gasket, part number 4295875AC, is a replacement gasket for transmission oil pans. A gasket seals the joint between the pan and the transmission case so fluid stays inside.
This gasket is sold with a universal fit. A gasket is shaped to one pan, so compare it with your existing transmission oil pan before fitting it.
Key features
- Replacement gasket for the transmission oil pan
- Seals the joint between the pan and the transmission case
- Part number 4295875AC from Crown Automotive
- Universal fit, with no vehicle named
Checking the pan flange
Most transmission pan gaskets fail because the sealing surfaces are not flat or clean. Before you fit a new gasket, scrape away old material and look for bends, nicks or thin spots on the pan rim and the case face. A pan that has been bent by a low obstacle may need straightening or replacement, since a gasket cannot seal a distorted surface.
Dry-fitting the gasket on the pan helps confirm the bolt holes line up and the gasket sits flat. Tighten the bolts gradually in a star pattern, and check for leaks once the vehicle has been driven and warmed up. Keep the fluid level in mind after reinstalling, because a small leak at the pan edge can lower the level over time.
- Scrape old gasket material off both faces
- Look for bends or nicks on the pan rim
- Tighten bolts gradually in a star pattern
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4295875AC |
| UPC | 848399028027 |
| Type | Transmission oil pan gasket |
Vehicle fitment
This gasket is not confirmed for a specific Jeep. Match it to your transmission oil pan before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Bolts and other hardware are not included with the gasket.
Not included: the transmission oil pan the gasket seals against.
