Overview
The Crown Automotive 52126122AC is a tie rod steering adjuster for a drag link, intended for left hand drive 2 and 4-door models. It is one of the replacement parts Crown Automotive offers for Jeep vehicles.
The kit includes a sleeve, two clamps, two bolts and two nuts. It is a Direct Fit part, so confirm the application for your vehicle’s year, model and trim before installing.
Key features
- Steering adjuster sleeve for drag link
- Includes 2 clamps, 2 bolts and 2 nuts
- Left hand drive application stated
- Fits 2 and 4-door models.
Drag link adjustment basics
A steering adjuster sleeve joins two drag link sections and lets the length be set so the steering centers correctly. The clamps grip the sleeve and the link ends, so the sleeve position and clamp tightness are what hold the setting under load. Set the length with the wheels straight and the steering centered before tightening anything.
Drag link components take a lot of stress off-road, so the joints and clamps should be checked regularly. Look for loose bolts, cracked clamps and any movement between the sleeve and the link. Recheck toe alignment after any change to the drag link length.
- Set the length with the wheels straight
- Check clamp bolts after trail runs
- Look for movement between sleeve and link
- Recheck toe after changing length
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52126122AC |
| UPC | 849603000365 |
| Application | Drag link |
| Drive side | Left hand drive |
| Body styles | 2 and 4-door models |
| Included | Sleeve, 2 clamps, 2 bolts, 2 nuts |
| Fitment | Direct Fit |
Vehicle fitment
It is a Direct Fit part for left hand drive, 2 and 4-door models. Match the drag link layout on your vehicle before installing the steering adjuster.
Confirm fit for your vehicle’s year, model and trim before ordering. It is made for left hand drive only, so right hand drive applications are not covered.
Installation notes
Check that the included clamps match the drag link diameter before tightening the bolts.
What’s included
The kit includes the sleeve, two clamps, two bolts and two nuts.









